TIETEX POLYESTER ROOFING MEMBRANE – REINFORCEMENT ROOFING FABRIC

  • 4″ x 324′
  • 6″ x 324′
  • 12″ x 324′
  • 20″ x 324′
  • 40″ x 324′
  • Tietex polyester fabric is a stitch-bonded, high-performance fabric
  • Used in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic
  • The polyester fabric is white with lay lines for one and two-ply roof systems
Tietexa

From $26.50

Login / Register for Additional Discounts

  • 4″ x 324′
  • 6″ x 324′
  • 12″ x 324′
  • 20″ x 324′
  • 40″ x 324′
  • Tietex polyester fabric is a stitch-bonded, high-performance fabric
  • Used in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic
  • The polyester fabric is white with lay lines for one and two-ply roof systems
In Stock. Ready for Delivery.

Description

SIZE. 4″ x 324′

DESCRIPTION. Tietex polyester roofing membrane is a reinforcement roofing fabric that is white with lay lines for one and two-ply roof systems. It offers an unusual combination of high-strength properties, and it also delivers good elongation for excellent thermal stress force accommodations.

USES. Tietex polyester fabric is a stitch-bonded, high-performance fabric for use in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic.

Made in the USA. If you would like to learn more about this exceptional roofing product, then get in touch with Tucson Rubberized Coatings today. We will be glad to answer your questions. If you need help finding the right coating product, then our team can help!

Additional information

Weight 2.2 kg
Dimensions 15 × 15 × 18 cm
Color

White

Size

4" x 324', 6" x 324', 12" x 324', 20" x 324', 40" x 324'

Quick Comparison

SettingsTIETEX POLYESTER ROOFING MEMBRANE - REINFORCEMENT ROOFING FABRIC removePRODUCT NO. 285 WATER SEALER & REPELLENT removePREMIER 4" FLAT SASH PAINT BRUSH removePRODUCT NO 3000 BRIGHT WHITE w/ MAXIMUM DIRT PICK UP RESISTANCE removePREMIER 9" HEAVY DUTY ROLLER FRAME remove5 GALLON BUCKET LID OPENER remove
ImageTietexaSilane/siloxane water repellent product-285Premier 4in Paint BrushTucson Rubberized Coating product 3000Premier 9in Roller Frame5gal bucket opener
SKU324W4285C5PBFSB43000RFB9LOR5
Rating
PriceFrom $26.50

Login / Register for Additional Discounts

$80.87

Login / Register for Additional Discounts

$4.99

Login / Register for Additional Discounts

From $81.00

Login / Register for Additional Discounts

$4.00

Login / Register for Additional Discounts

$2.99

Login / Register for Additional Discounts

Stock
Availability
Add to cart

Buying Options

Add to cart

Add to cart

Buying Options

Add to cart

Add to cart

Description
  • 4" x 324'
  • 6" x 324'
  • 12" x 324'
  • 20" x 324'
  • 40" x 324'
  • Tietex polyester fabric is a stitch-bonded, high-performance fabric
  • Used in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic
  • The polyester fabric is white with lay lines for one and two-ply roof systems
  • Water-based silane/siloxane water repellent
  • Can be used in lightweight concrete and mortar joints
  • Does not alter the appearance of surfaces
  • Designed to seal porous surfaces; Brick, Block, Adobe
  • Polyester bristles provide superior control
  • Durable and easy to clean
  • Can be used with interior or exterior paints
  • Maximum dirt pick up resistance
  • Stays whiter and brighter longer
  • Ideal for re-coats or primed substrates
  • High reflectivity for great energy savings
  • 8-Year limited manufacturers warranty
  • 5 wire cage frame
  • Plastic handle with metal ferrule
  • Threaded handle for use with extension poles
  • Use with all 9 in. standard core rollers
  • Solid one piece construction
  • Opens plastic containers quickly and easily without damaging the lids
  • Use on virtually any plastic container
Content

SIZE. 4" x 324'

DESCRIPTION. Tietex polyester roofing membrane is a reinforcement roofing fabric that is white with lay lines for one and two-ply roof systems. It offers an unusual combination of high-strength properties, and it also delivers good elongation for excellent thermal stress force accommodations.

USES. Tietex polyester fabric is a stitch-bonded, high-performance fabric for use in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic.

Made in the USA. If you would like to learn more about this exceptional roofing product, then get in touch with Tucson Rubberized Coatings today. We will be glad to answer your questions. If you need help finding the right coating product, then our team can help!

DESCRIPTION. PRODUCT NO. 285 can seal porous surfaces such as brick, block, adobe or concrete, and pavers.

USES. PRODUCT NO. 285 is excellent for use as a protective sealer against water on nearly any surface. Surfaces this product can be used to protect against water include brick, block, adobe or concrete, pavers and wood decks.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules or peeling paint, as well as all other foreign matter. Use wire brushing, sanding or power washing to prepare surfaces.

APPLICATION. Power mix the water sealer and repellent to an even mixture. Apply to surface with a stiff brush, roller or airless sprayer to desired surface. Also, keep the brush or roller moist for easy application. Do not apply product when rain or frost is forecast within 24 hours. Apply only when the temperature is 50 degrees and rising.

KEEP PRODUCT FROM FREEZING

CLEAN-UP. Use soap and water to clean all equipment immediately after use. If you have dried film, then you may need to use paint remover.

DESCRIPTION: Provides a superb finish at an attractive price. Polyester bristles allow you to apply paint with superior control.

Can be used with interior or exterior paints.

DESCRIPTION. PRODUCT NO. 3000 FLEXA-COAT is an acrylic elastomeric roof coating with maximum dirt pickup resistance. PRODUCT NO. 3000 FLEXA-COAT roof coating is designed for maximum protection against sun and extreme weather. Its bright white finish enables it to deflect the sun's heat and harmful UV rays, protecting the roof substrate and extending life expectancy. PRODUCT NO. 3000 FLEXA-COAT forms a thick, rubber-like shield that expands and contracts greater than 320% to prevent roof damage. PRODUCT NO. 3000 FLEXA-COAT resists cracking, peeling, and mildew while offering unbeatable weatherproof protection and excellent resistance to dirt pickup.

USES. PRODUCT NO. 3000 FLEXA-COAT can be directly applied over most previously coated roof surfaces. PRODUCT NO. 3000 FLEXACOAT should not be applied over 100% silicone. When applying over aluminum roof coating, asphalt, tar, hot-applied built-up roofing, granulated cap sheet and metal roofing systems. exposed spray polyurethane foam, TPO, or EPDM follow surface preparation instructions below.

SURFACE PREPARATION. Roof substrates must be clean, dry, free of all debris, and any contaminants which would impede proper adhesion. A pressure wash is recommended, if a pressure washer is not available a cleaning agent should be used in conjunction with hose and broom washing. In addition to pressure washing, a wire brush should be used to remove any surface rust on metal roofing systems. Metal panels where the structural integrity has been compromised should be removed and replaced with like panels. A bleach and water solution (1 part bleach to 2 parts water) should be used to treat any roof areas that have mildew or algae. All roof surfaces should be thoroughly cleaned and allowed to dry completely prior to application of any Tucson Rubberized Coatings products. When applying over aluminum roof coating, asphalt, tar, hotapplied built-up roofing, granulated cap sheet and metal roofing systems, one coat of PRODUCT NO. 295-G STAIN SHIELD or PRODUCT NO. 297-X X-TREME must be applied prior to the application of PRODUCT NO. 3000 FLEXA-COAT. All large cracks and seams should be repaired by embedding one layer of polyester fabric between two layers of PRODUCT NO. 501-W-P ACRYLIC MASTIC or PRODUCT NO. 510 REINFORCED ACRYLIC MASTIC prior to application of PRODUCT NO. 3000 FLEXA-COAT. To achieve proper adhesion over TPO, PVC, EPDM or exposed Spray Polyurethane Foam, one coat of PRODUCT NO. 297-X X-TREME must be applied prior to any Tucson Rubberized Coatings repair or topcoat products.

APPLICATION. Proper protective clothing and PPE should be worn when applying products. It is normal to see a small amount of separation when first opening a pail. If necessary, gently mix the product with a roller frame or paddle mixer, being careful to not introduce air into the product during mixing. Product can be applied by roller (3/4 - 1 1/4" nap), brush, and spray equipment capable of 2000 - 3000 PSI and 1 - 3 GPM of output. For best results when spraying, an 8-31 - 8-41 reversible spray is recommended. Do not dilute product. Tucson Rubberized Coatings Products should not be applied when freezing temperatures or rain is expected within 24 hours of completed application. During application, roof surface temperatures should be between 40 and 115 degrees Fahrenheit, with no moisture present.

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

CLEAN-UP. Clean brushes, tools and other equipment with warm soapy water immediately after use. Dried film may require paint remover.

DESCRIPTION: Heavy-duty roller frame for use with all 9 in. standard core roller covers. Five wire cage with plastic end caps. Threaded comfort grip plastic handle with metal ferrule for additional strength when adding extension poles.

DESCRIPTION: Specially designed to open 5 gallon buckets/containers without damaging the lids. The grip of this 5 gallon bucket lid removal tool makes it easy to open the lid without using a screwdriver.

A hole on the end of the handle lets you hang and store this 5 gallon bucket lid opener. Wonderful ergonomic design is comfortable to hold and use over and over. You won’t want to leave this affordable accessory out of your toolbox!

Weight2.2440.4620.70.22
Dimensions15 × 15 × 18 cm15 × 15 × 18 cm12 × 12 × 12 cm15 × 15 × 18 cm12 × 12 × 12 cm12 × 12 × 12 cm
Additional information
Weight 2.2 kg
Dimensions 15 × 15 × 18 cm
Color

White

Size

4" x 324', 6" x 324', 12" x 324', 20" x 324', 40" x 324'

Weight 44 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

8.0 lbs

Drying Time (50% Relative Humidity & 70°F)

Touch/2-3 hrs

Flammability

None

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 44 lbs.

Color

Clear

Size

5 Gallon

Weight 0.4 kg
Dimensions 12 × 12 × 12 cm
Weight 62 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

11.2 lbs

Solids by Weight*

57%

Drying Time (50% Relative Humidity & 70°F)

Touch: 4 hrs, Firm: 12 hrs

Flammability

None

VOC

< 100 g/I

Elongation

>320%

Tensile Strength

> 300 PSI

Viscosity

125-135 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5-gallon bucket weight approximately 62 lbs.

Color

Tan, White

Size

5 Gallon

Weight 0.7 kg
Dimensions 12 × 12 × 12 cm
Weight 0.22 kg
Dimensions 12 × 12 × 12 cm