Self-adhesive Granulated Cap Sheet Membrane TRC 950-C

TRC 950-C are self-adhesive cap sheet membranes composed of SBS modified bitumen with a composite
reinforcement. The surface is protected by granules, while the underface is covered with a split-back silicone
release film.

950c white

From $140.00

Login / Register for Additional Discounts

TRC 950-C are self-adhesive cap sheet membranes composed of SBS modified bitumen with a composite
reinforcement. The surface is protected by granules, while the underface is covered with a split-back silicone
release film.

In Stock. Ready for Delivery.

Additional information

Weight 110 kg
Dimensions 60 × 14 × 14 cm
Thickness

141 mil (3.6 mm)

Dimensions

39 in × 33 ft (1 m × 10 m)

Gross/Net Coverage

107 sq ft (10 sq m)
99 sq ft (9.2 sq m)

Roll weight

86 lb (39 kg)

Surface

Granuled

Underface

Self-adhesive, covered with a split-back silicone release film

Ul 790*

TRC 950-C

Color

Tan, White

Quick Comparison

SettingsSelf-adhesive Granulated Cap Sheet Membrane TRC 950-C removePRODUCT: 700 ULTIMATE RV ROOF COATING remove5' WOOD EXTENSION POLE removePRODUCT NO 297-X ULTIMATE ADHESION ACRYLIC PRIMER removeProduct No 910 Flashing Sealant removePRODUCT NO. 6000-QuickDry remove
Image950c whiteUltimate RV roof coating product no 70006ft Wood Ext Poleproduct 297910 product6000 qd 1
SKU700W1EPW6297-x6000W5-1
Rating
PriceFrom $140.00

Login / Register for Additional Discounts

$25.00

Login / Register for Additional Discounts

$5.00

Login / Register for Additional Discounts

From $25.00

Login / Register for Additional Discounts

From $390.00

Login / Register for Additional Discounts

From $114.00

Login / Register for Additional Discounts

Stock
Availability
Add to cart

Buying Options

Add to cart

Add to cart

Buying Options

Buying Options

Buying Options

DescriptionTRC 950-C are self-adhesive cap sheet membranes composed of SBS modified bitumen with a composite reinforcement. The surface is protected by granules, while the underface is covered with a split-back silicone release film.
  • Manufactured to adhere to common RV roofs including EPDM and TPO when used with 297-X primer
  • Ultra white that remains whiter than any coating in its class
  • Maximum adhesion, strength, and elasticity to resist cracking and peeling
  • Maximum bleed block technology with no yellowing or staining over all tested substrates
  • 5-Year limited manufacturers warranty
  • 5 ft. wood construction
  • Strong and durable
  • Does not conduct electricity
  • Versatile tool accommodates a variety of attachments (paint rollers, brooms or mops)
  • Creates a waterproofing membrane for areas with frequent standing water
  • X-TREME adhesion primer for a variety of substrates including new and aged EPDM, TPO, and Spray Polyurethane Foam
  • Excellent bleed block resistance to eliminate top coat discoloration over asphalt
  • Which primer is right for me
  • Quick Dry Formula for abnormal weather conditions
  • An ultra white acrylic roof coating that forms a thick rubber-like shield
  • Offers excellent weatherproof protection due to its maximum resistance to ponded water conditions and high reflectivity
  • 10-Year limited manufacturers warranty

COMPLIES WITH:

compliance

astm

crrc

Content

DESCRIPTION. Ultimate RV Roof Coating from Tucson Rubberized Coatings is an ultra-white 100% acrylic elastomeric roof coating. This premium grade coating is designed for maximum protection against sun and weather. Its bright finish enables it to reject the sun’s heat and harmful UV rays. This product forms a thick, rubber-like shield that expands and contracts over 400% to prevent roof damage. It resists cracking, peeling, and mildew while offering unbeatable weatherproof protection and excellent resistance to lifting under ponding water conditions.

USES. Ultimate RV Roof Coating can be used over mineral surface roofing, aged aluminum, tar, asphalt, or hot-applied built-up roofing after application of PRODUCT NO. 210 emulsion. All large cracks and seams should be reinforced with woven polyester fabric embedded into PRODUCT NO. 210. (on EPDM or TPO roofs, embed membrane over any large crack or seams into PRODUCT NO. 700). This product can be directly applied over most previously white-coated sound roof surfaces. PRODUCT NO. 700 is highly recommended for EPDM or TPO roofs or areas subject to unusually severe moisture conditions such as valleys, around roof drains, low spots or in any area where water is expected to be trapped on a roof.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules, gravel or peeling paint and all other foreign matter. Rusty metal must be cleaned with a wire brush and primed with PRODUCT NO. 101 Asphalt primer prior to application of PRODUCT NO. 210 emulsion and PRODUCT NO. 700 Ultimate RV Roof Coating. Polyurethane Foam Roofs: Must be dry and clean of debris before application. Pressure washing surfaces is recommended in order to ensure the best results. Surfaces with any mildew growth or stains should be cleaned with a bleach solution (2 parts water to one part bleach) prior to applying this product. Be certain all surfaces are thoroughly rinsed and dry prior to coating application.

APPLICATION: Material should be stirred in the container and applied by a soft bristle brush or broom, a long nap roller or suitable spray equipment (minimum working pressure of 3000 PSI for airless sprayer). Coverage rates will vary depending on porosity of surface as well as roof pitch. Recommended application is two coats applied at right angles to previous coat by brush, roller or spray for maximum reflectivity, durability and life cycles. First coat must dry before second coat is applied.

During application, keep tools clean and free from coating build up by rinsing frequently with water. Adequate protection for most surfaces is obtained by the use of two gallons of Ultimate Ultimate RV Roof Coating per 100 sq. ft. applied in two coats. Allow 24 to 72 hours depending on weather conditions and applications rate of curing prior to application of second coat. Do not apply unless temperature is 55°F and rising. Do not apply when rain or frost is forecast within 24 hours after application. Conditions of high humidity will prevent curing in the usual four hours. Avoid heavy foot traffic.

KEEP PRODUCT FROM FREEZING.

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

CLEAN-UP. Clean brushes, tools and other equipment with soapy water immediately after use. However, dried film may require paint remover.

DESCRIPTION: Single piece extension poles can be used for a variety of painting and cleaning projects. Constructed of strong wood with a metal tip. Threaded tip compatible with threaded paint roller frames, brooms and a variety of other tools.

  • Durable design provides long-lasting performance
  • A do-it-yourself essential offers multiple uses
  • Compatible with many paint rollers, brooms or mops

DESCRIPTION. PRODUCT NO. 297-X X-TREME is a stain resistant, highly adhesive primer for new and existing roofing systems. PRODUCT NO. 297-X X-TREME is a waterproof membrane ideal for areas with low spots that are prone to standing water. PRODUCT NO. 297-X X-TREME should be used as a base coat, not being left exposed to the suns UV rays for extended periods of time.

USES. PRODUCT NO. 297-X X-TREME is to be used as a base coat primer over most substrates including EPDM, TPO, PVC, spray polyurethane foam, Hypalon, asphalt, tar, hot-applied built-up roofing, granulated cap sheet, steel, and aluminum roofing substrates. PRODUCT NO. 297-X X-TREME is not recommended to be used as a fabric saturant when installing fabric overlay systems.

SURFACE PREPARATION. Roof substrates must be clean, dry, free of all debris, and any contaminates which would impede proper adhesion. A pressure wash is recommended, if a pressure washer is not available a cleaning agent should be used in conjunction with hose and broom washing. In addition to pressure washing, a wire brush should be used to remove any surface rust on metal roofing systems. Metal panels where the structural integrity has been compromised should be removed and replaced with like panels. A bleach and water solution (1 part bleach to 2 parts water) should be used to treat any roof areas that have mildew or algae. All roof surfaces should be thoroughly cleaned and allowed to dry completely prior to application of any Tucson Rubberized Coatings restoration products

APPLICATION. Proper protective clothing and PPE should be worn when applying products. It is normal to see a small amount of separation when first opening a pail. If necessary, gently mix the product with a roller frame or paddle mixer, being careful to not introduce air into the product during mixing. Product can be applied by roller (3/8 - 3/4" nap), brush, and spray equipment capable of 2000 - 3000 PSI and 1 - 3 GPM of output. For best results when spraying, an 8-28 - 8-31 reversible spray is recommended. Do not dilute product. Tucson Rubberized Coatings Products should not be applied when freezing temperatures or rain is expected within 24 hours of completed application. During application, roof surface temperatures should be between 40 and 115 degrees Fahrenheit, with no moisture present. PRODUCT NO. 297-X X- TREME must be coated within 24 - 48 hours to avoid premature film degradation.

RECOMMENDED COVERAGE RATES (completed in 1 coats): Product should be applied at a minimum rate of .5 - .75 gallon per 100 square feet of roof surface, per coat. to avoid prolonged cure times, PRODUCT NO. 670 X-TREME should not be applied at a rate greater than 1 gallon per 100 square feet of roof surface per coat. Coverage rates will depend on the porosity of the roofing substrate

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

STORAGE: Product should be stored in a clean and dry area, away from direct sunlight and protected from freezing.

CLEAN-UP. Clean brushes, tools, and other equipment with warm soapy water immediately after use. Dried film may require paint remover.

HANDLING PRECAUTIONS: Product safety information required for safe use is not included. Before handling, read product safety data sheets and container labels for safe use and health hazard information. Safety data sheets are available on the TRC website at: www.rubberized.com.

LIMITED WARRANTY AND DISCLAIMER: To the best of our knowledge, the technical data contained herein is true and accurate at the date of issuance and is subject to change without prior notice. User must contact Tucson Rubberized Coatings to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. Liability, if any, is limited to replacement of product unless installed by an approved contractor in accordance with Tucson Rubberized Coatings warranty procedures and program. For limited manufacturer's warranty and disclaimer information, visit our website at: www.rubberized.com.

DESCRIPTION: PRODUCT NO. 910 FLASHING SEALANT is a high performance one-part, moisture curing, and room temperature vulcanizing (RTV) 100% silicone flashing sealant combined with reinforcing materials to provide strong seal-ability around roof fasteners, transitions and penetrations. PRODUCT NO. 910 FLASHING SEALANT has ultrahigh strength and remains very durable. It will maintain its integrity on fasteners and penetrations with movement. PRODUCT NO. 910 FLASHING SEALANT exhibits excellent unprimed adhesion to concrete, metals and most other roofing substrates, provided they are clean, dry and free of dust and frost. PRODUCT NO. 910 FLASHING SEALANT is unaffected by sunlight (ultra-violet rays), ozone, temperature extremes, rain and snow. It has a long service life, and it was designed to perform between -60°C to 200°C (-76°F to 392°F).

USES: •Repair material for metal and SPF roofs •Seal fasteners, seams and details on low and semi-steep sloped roofs •Pipe penetrations through roof decks in metal flashings •Concrete, metal and most construction substrates •Mold and mildew resistance

SURFACE PREPARATION: All penetrations must be clean, dry and free of contaminants before PRODUCT NO. 910 FLASHING SEALANT is applied. Dust and loose particles must be blown out of the joint with oil-free compressed air, moving only in one direction. An oily surface may reduce adhesion.

APPLICATION: Always test adhesion before applying to different substrates. PRODUCT NO. 910 FLASHING SEALANT is ready-to-use and requires no mixing or additives. Apply PRODUCT NO. 910 FLASHING SEALANT to roofing substrate, fastener or penetration using appropriate caulking gun, brush, trowel, joint knife or plastic spatula to achieve a uniform membrane over the transition surfaces. Top coat with PRODUCT NO. 990 FOREVER-COAT Silicone Roof coating when dry to touch. PRODUCT NO. 910 FLASHING SEALANT can be applied in a single coat. Spread uncured PRODUCT NO. 910 FLASHING SEALANT to extend a minimum of 4” (100 mm) over the surface of the roof. Regularly monitor wet film thickness during application to ensure adequate uniform coverage. Coverage may vary depending on application technique and nature of substrate. Curing begins as soon as the sealant comes in contact with air. Application at temperatures below 4°C (40°F) will slow curing, while increased levels of humidity will aid curing. Tooling should be done before skin-over takes place. Remove wet material from application/spreading tool with a rag before the material cures. Carefully use appropriate cleaning agent, such as citrus solvent or odorless mineral spirits, to remove cured material from tools. For best results, follow precautions on packaging.

STORAGE: PRODUCT NO. 910 FLASHING SEALANT, when stored in original, unopened container in dry, shaded conditions, away from sources of heat or ignition, and stored below 32°C (90°F), has a shelf life of 12 months from date of manufacture.

HANDLING PRECAUTIONS: Product safety information required for safe use is not included. Before handling, read product safety data sheets and container labels for safe use and health hazard information. Safety data sheets are available on the TRC website at: www. rubberized.com.

PHYSICAL PROPERTIES: 100% Silcone Flashing Sealant Durometer Hardness 43 points (ASTM D2240, Shore A) Tensile Strength 160 psi (11 kg/cm² ) (ASTM D412) Elongation at Break 67% (ASTM D412) Tear Resistance 27 ppi (4.7 kN/m) (ASTM D624, Die B)

*NOTE: Percentages stated are + or -5% Approx. Shipping Weights: (All approximate weights include container) weight per gallon approximately 14 lbs.

LIMITED WARRANTY AND DISCLAIMER: To the best of our knowledge, the technical data contained herein is true and accurate at the date of issuance and is subject to change without prior notice. User must contact Tucson Rubberized Coatings to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. Liability, if any, is limited to replacement of product unless installed by an approved contractor in accordance with Tucson Rubberized Coatings warranty procedures and program. For limited manufacturerʼs warranty and disclaimer information, visit our website at: www.rubberized.com.

DESCRIPTION. PRODUCT NO. 6000 Quick Dry is a durable 100% acrylic elastomeric roof coating in a quick dry version than can withstand light to moderate rain within 15-30 minutes. PRODUCT NO. 6000 Quick Dry is designed for maximum protection against sun and extreme weather. Its bright white fi nish enables it to defl ect the sunʼs heat and harmful UV rays, protecting the roof substrate and lowering energy bills. PRODUCT NO. 6000 Quick Dry forms a thick, rubber-like shield that expands and contracts greater than 220% to prevent cracking and slow the aging process. PRODUCT NO. 6000 Quick Dry resists cracking, peeling, and mildew while providing excellent protection against extreme weather.

USES. PRODUCT NO. 6000 Quick Dry can be used directly over spray polyurethane foam and most previously coated roof surfaces. PRODUCT NO. 6000 Quick Dry should not be applied over 100% silicone. When applying over aluminum roof coating, asphalt, tar, hot applied built-up roofi ng, granulated cap sheet, and metal roofi ng systems, TPO, or EPDM follow surface preparation instructions below.

SURFACE PREPARATION. Roof substrates must be clean, dry, free of all debris, and any contaminants which would impede proper adhesion. A pressure wash is recommended, if a pressure washer is not available a cleaning agent should be used in conjunction with hose and broom washing. In addition to pressure washing, a wire brush should be used to remove any surface rust on metal roofi ng systems. Metal panels where the structural integrity has been compromised should be removed and replaced with like panels. A bleach and water solution (1 part bleach to 2 parts water) should be used to treat any roof areas that have mildew or algae. All roof surfaces should be thoroughly cleaned and allowed to dry completely prior to application of any Tucson Rubberized Coatings products. Over aluminum roof coating, asphalt, tar, hot-applied built-up roofi ng, granulated cap sheet, and metal roofi ng systems, one coat of PRODUCT NO. 295-G STAIN SHIELD or PRODUCT NO. 297-X X-TREME must be applied prior to the application of PRODUCT NO. 6000 Quick Dry. All large cracks and seams should be repaired by embedding one layer of polyester fabric between two layers of PRODUCT NO. 501-W-P ACRYLIC MASTIC or PRODUCT NO. 510 REINFORCED ACRYLIC MASTIC prior to application of PRODUCT NO. 6000 Quick Dry. To achieve proper adhesion over TPO, PVC, or EPDM, one coat of PRODUCT NO. 297-X X-TREME must be applied prior to any Tucson Rubberized Coatings repair or top coat products.

APPLICATION. Proper protective clothing and PPE should be worn when applying products. It is normal to see a small amount of separation when fi rst opening a pail. If necessary, gently mix the product with a roller frame or paddle mixer, being careful to not introduce air into the product during mixing. Product can be applied by roller (3/4 - 1 1/4” nap), brush, and spray equipment capable of 2000 - 3000 PSI and 1-3 GPM of output. For best results when spraying, an 8-31 or -8-41 reversible spray is recommended. Do not dilute product. Tucson Rubberized Coatings Products should not be applied when freezing temperatures or rain is expected within 24 hours of completed application. During application, roof surface temperatures should be between 40 and 115 degrees Fahrenheit, with no moisture present.

RECOMMENDED COVERAGE RATES (completed in 2 coats): PRODUCT NO. 6000 Quick Dry should be applied at a minimum rate of 1 - 1 ½ gallons per 100 square feet of roof surface, per coat. The fi rst coat should be allowed to cure approximately 24 hours before a second coat is applied. The second coat should be applied perpendicular to the fi rst coat (cross hatch application). Two coats applied at the specifi ed rate are required to obtain a Limited Manufacturer Material Warranty. Coverage rates will depend on porosity of the roofi ng substrate. Final Dry Film Thickness (DFT) will

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

STORAGE: Product should be stored in a clean and dry area, away from direct sunlight and protected from freezing.

CLEAN-UP: Clean brushes, tools and other equipment with warm soapy water immediately after use. Dried fi lm may require paint remover.

HANDLING PRECAUTIONS: Product safety information required for safe use is not included. Before handling, read product safety data sheets and container labels for safe use, physical and health hazard information. Safety data sheets are available on the TRC website at www.rubberized.com. You can also obtain a copy from one of our local TRC stores.

Weight110131.25546515
Dimensions60 × 14 × 14 cm10 × 10 × 10 cm72 × 4 × 4 cm15 × 15 × 18 cm15 × 15 × 18 cm15 × 18 × 16 cm
Additional information
Weight 110 kg
Dimensions 60 × 14 × 14 cm
Thickness

141 mil (3.6 mm)

Dimensions

39 in × 33 ft (1 m × 10 m)

Gross/Net Coverage

107 sq ft (10 sq m)
99 sq ft (9.2 sq m)

Roll weight

86 lb (39 kg)

Surface

Granuled

Underface

Self-adhesive, covered with a split-back silicone release film

Ul 790*

TRC 950-C

Color

Tan, White

Weight 13 kg
Dimensions 10 × 10 × 10 cm
Weight per Gallon

11.4 lbs

Solids by Weight*

71%

Drying Time (50% Relative Humidity & 70°F)

Touch/2.5 hrs – Firm/5 hrs minimum

Flammability

None

Wet Film

None

VOC

< 150 grams/liter

Elongation

>400%

Tensile Strength

400 PSI

Viscosity

120 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
1 gallon 12 lbs

Color

Tan, White

Size

1 Gallon

Weight 1.25 kg
Dimensions 72 × 4 × 4 cm
Weight 54 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

8.5 lbs

Solids by Weight*

49%

Drying Time (50% Relative Humidity & 70°F)

Touch: 4 hrs, Firm: 12 hrs

Flammability

None

VOC

< 50 g/I

Viscosity

85 – 95 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallon bucket weight approximately 48 lbs.

Color

Off-White

Size

5 Gallon, 1 Gallon

Solids by Volume

49%

Silicone

None

Weight 65 kg
Dimensions 15 × 15 × 18 cm
Durometer Hardness

43 points

Tensile Strength

160 psi (11 kg/cm² )

Elongation at Break

67%

Tear Resistance

27 ppi (4.7 kN/m)

Color

White

Size

5 Gallon

Weight 15 kg
Dimensions 15 × 18 × 16 cm
Weight per Gallon

11.4 lbs

Solids by Weight*

71%

Drying Time (50% Relative Humidity & 70°F)

Touch/2.5 hrs – Firm/5 hrs minimum

Flammability

None

Wet Film

None

VOC

< 150 grams/liter

Elongation

>300%

Tensile Strength

300 PSI

Viscosity

120 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 58 lbs.

Color

tan, white

Size

5 Gallon