Self-Adhesive Base Ply Membrane TRC 950-B

TRC 950-B is a self-adhesive base ply membrane composed of SBS modified bitumen. The surface
is a UV-resistant tri-laminated woven polyethylene, while the self-adhesive underface is covered with a split-back
silicone release film.

950b product

$140.00

Login / Register for Additional Discounts

TRC 950-B is a self-adhesive base ply membrane composed of SBS modified bitumen. The surface
is a UV-resistant tri-laminated woven polyethylene, while the self-adhesive underface is covered with a split-back
silicone release film.

In Stock. Ready for Delivery.

Additional information

Weight 60 kg
Dimensions 60 × 14 × 14 cm
Thickness

40 mil (1.0 mm)

Dimensions

39 in × 65 ft (1 m × 20 m)

Gross/Net Coverage

213 sq ft (20 sq m) / 194 sq ft (18 sq m)

Roll Weight

40 lb (20 kg)

Surface

Tri-laminated Woven polyethylene

Underface

Self-adhesive, covered with a split-back silicone release film

Quick Comparison

SettingsSelf-Adhesive Base Ply Membrane TRC 950-B removePRODUCT NO. 7000-QuickDry removeSelf-adhesive Granulated Cap Sheet Membrane TRC 950-C removeEssential RV Coating Bundle removeTIETEX POLYESTER ROOFING MEMBRANE - REINFORCEMENT ROOFING FABRIC removePRODUCT NO. 285 WATER SEALER & REPELLENT remove
Image950b product7000qd950c whiteimage 6483441TietexaSilane/siloxane water repellent product-285
SKU7000W5-1324W4285C5
Rating
Price$140.00

Login / Register for Additional Discounts

From $116.00

Login / Register for Additional Discounts

From $140.00

Login / Register for Additional Discounts

$75.00

Login / Register for Additional Discounts

From $26.50

Login / Register for Additional Discounts

$80.87

Login / Register for Additional Discounts

Stock
Availability
Add to cart

Add to cart

Buying Options

Buying Options

Add to cart

Buying Options

Add to cart

DescriptionTRC 950-B is a self-adhesive base ply membrane composed of SBS modified bitumen. The surface is a UV-resistant tri-laminated woven polyethylene, while the self-adhesive underface is covered with a split-back silicone release film.
  • Quick Dry Formula for abnormal weather conditions
  • Maximum adhesion, strength, & elasticity to resist cracking & peeling
  • Maximum coating properties to ensure the highest grade of protection from extreme weather conditions
  • 12-Year limited manufacturers warranty

COMPLIES WITH:

compliance

crrc

TRC 950-C are self-adhesive cap sheet membranes composed of SBS modified bitumen with a composite reinforcement. The surface is protected by granules, while the underface is covered with a split-back silicone release film.
  • 4" x 324'
  • 6" x 324'
  • 12" x 324'
  • 20" x 324'
  • 40" x 324'
  • Tietex polyester fabric is a stitch-bonded, high-performance fabric
  • Used in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic
  • The polyester fabric is white with lay lines for one and two-ply roof systems
  • Water-based silane/siloxane water repellent
  • Can be used in lightweight concrete and mortar joints
  • Does not alter the appearance of surfaces
  • Designed to seal porous surfaces; Brick, Block, Adobe
Content

DESCRIPTION: PRODUCT NO. 7000 Quick Dry is an ultra white 100% acrylic elastomeric roof coating with state of the art bleed blocking technology in a quick dry version than can withstand light to moderate rain within 15-30 minutes. This premium grade roof coating is designed for maximum protection against sun and extreme weather. Its bright white finish enables it to deflect the sunʼs heat and harmful UV rays, protecting the roof substrate and extending life expectancy. PRODUCT NO. 7000 Quick Dry PERMA-COAT forms a thick, rubber-like shield that expands and contracts greater than 280% to prevent roof damage. PRODUCT NO. 7000 Quick Dry PERMACOAT resists cracking, peeling, and mildew while offering unbeatable weatherproof protection and excellent resistance to ponding water.

USES: PRODUCT NO. 7000 Quick Dry PERMA-COAT with state of the art bleed blocking technology can be used over asphalt, tar, hot-applied built-up roofing, granulated cap sheet and metal roofing systems. PRODUCT NO. 7000 Quick Dry PERMA-COAT can be directly applied over most previously coated roof surfaces. PRODUCT NO. 7000 Quick Dry PERMACOAT should not be applied over 100% silicone. When applying over aluminum roof coating, exposed spray polyurethane foam, TPO, or EPDM follow surface preparation instructions below.

SURFACE PREPARATION: Roof substrates must be clean, dry, free of all debris, and any contaminants which would impede proper adhesion. A pressure wash is recommended, if a pressure washer is not available a cleaning agent should be used in conjunction with hose and broom washing. In addition to pressure washing, a wire brush should be used to remove any surface rust on metal roofing systems. Metal panels where the structural integrity has been compromised should be removed and replaced with like panels. A bleach and water solution (1 part bleach to 2 parts water) should be used to treat any roof areas that have mildew or algae. All roof surfaces should be thoroughly cleaned and allowed to dry completely prior to application of any Tucson Rubberized Coatings products. Over aluminum roof coating, one coat of PRODUCT NO. 295-G STAIN SHIELD or PRODUCT NO. 297-X X-TREME must be applied prior to the application of PRODUCT NO. 7000 Quick Dry PERMA-COAT. All large cracks and seams should be repaired by embedding one layer of polyester fabric between two layers of PRODUCT NO. 501- W-P ACRYLIC MASTIC or PRODUCT NO. 510 REINFORCED ACRYLIC MASTIC prior to application of PRODUCT NO. 7000 Quick Dry PERMA-COAT. To achieve proper adhesion over TPO, PVC, EPDM or exposed spray polyurethane foam, one coat of PRODUCT NO. 297-X X-TREME must be applied prior to any Tucson Rubberized Coatings repair or top coat products.

APPLICATION. PPE should be worn when applying products. It is normal to see a small amount of separation when first opening a pail. If necessary, gently mix the product with a roller frame or paddle mixer, being careful to not introduce air into the product during mixing. Product can be applied by roller (3/4 - 1 1/4” nap), brush, and spray equipment capable of 2000 - 3000 PSI and 1 - 3 GPM of output. For best results when spraying, an 8-31 - 8-41 reversible spray is recommended. Do not dilute product. Tucson Rubberized Coatings Products should not be applied when freezing temperatures or rain is expected within 24 hours of completed application. During application, roof surface temperatures should be between 40 and 115 degrees Fahrenheit, with no moisture present.

RECOMMENDED COVERAGE RATES (completed in 2 coats): PRODUCT NO. 7000 Quick Dry PERMA-COAT should be applied at a minimum rate of 1 - 1 ½ gallons per 100 square feet of roof surface, per coat. The first coat should be allowed to cure approximately 24 hours before a second coat is applied. The second coat should be applied perpendicular to the first coat (cross hatch application). Two coats applied at the specified rate are required to obtain a Limited Manufacturer Material Warranty. Coverage rates will depend on porosity of the roofing substrate. Final Dry Film Thickness (DFT) will determine the overall success and warranty term.

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

STORAGE: Product should be stored in a clean and dry area, away from direct sunlight and protected from freezing.

CLEAN-UP: Clean brushes, tools and other equipment with warm soapy water immediately after use. Dried fi lm may require paint remover.

HANDLING PRECAUTIONS: Product safety information required for safe use is not included. Before handling, read product safety data sheets and container labels for safe use, physical and health hazard information. Safety data sheets are available on the TRC website at www.rubberized.com. You can also obtain a copy from one of our local TRC stores.

PRODUCT: 700 ULTIMATE RV ROOF COATING

  • Manufactured to adhere to common RV roofs including EPDM and TPO when used with 297-X primer
  • Ultra white that remains whiter than any coating in its class
  • Maximum adhesion, strength, and elasticity to resist cracking and peeling
  • Maximum bleed block technology with no yellowing or staining over all tested substrates
  • 5-Year limited manufacturers warranty

PRODUCT NO 297-X ULTIMATE ADHESION ACRYLIC PRIMER

  • Creates a waterproofing membrane for areas with frequent standing water
  • X-TREME adhesion primer for a variety of substrates including new and aged EPDM, TPO, and Spray Polyurethane Foam
  • Excellent bleed block resistance to eliminate top coat discoloration over asphalt
  • Which primer is right for me

TIETEX POLYESTER ROOFING MEMBRANE – REINFORCEMENT ROOFING FABRIC

  • 6″ x 324′
  • Tietex polyester fabric is a stitch-bonded, high-performance fabric
  • Used in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic
  • The polyester fabric is white with lay lines for one and two-ply roof systems

PREMIER 4″ FLAT SASH PAINT BRUSH

  • Polyester bristles provide superior control
  • Durable and easy to clean
  • Can be used with interior or exterior paints

SIZE. 4" x 324'

DESCRIPTION. Tietex polyester roofing membrane is a reinforcement roofing fabric that is white with lay lines for one and two-ply roof systems. It offers an unusual combination of high-strength properties, and it also delivers good elongation for excellent thermal stress force accommodations.

USES. Tietex polyester fabric is a stitch-bonded, high-performance fabric for use in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic.

Made in the USA. If you would like to learn more about this exceptional roofing product, then get in touch with Tucson Rubberized Coatings today. We will be glad to answer your questions. If you need help finding the right coating product, then our team can help!

DESCRIPTION. PRODUCT NO. 285 can seal porous surfaces such as brick, block, adobe or concrete, and pavers.

USES. PRODUCT NO. 285 is excellent for use as a protective sealer against water on nearly any surface. Surfaces this product can be used to protect against water include brick, block, adobe or concrete, pavers and wood decks.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules or peeling paint, as well as all other foreign matter. Use wire brushing, sanding or power washing to prepare surfaces.

APPLICATION. Power mix the water sealer and repellent to an even mixture. Apply to surface with a stiff brush, roller or airless sprayer to desired surface. Also, keep the brush or roller moist for easy application. Do not apply product when rain or frost is forecast within 24 hours. Apply only when the temperature is 50 degrees and rising.

KEEP PRODUCT FROM FREEZING

CLEAN-UP. Use soap and water to clean all equipment immediately after use. If you have dried film, then you may need to use paint remover.

Weight6062110752.244
Dimensions60 × 14 × 14 cm15 × 15 × 18 cm60 × 14 × 14 cm15 × 15 × 18 cm15 × 15 × 18 cm15 × 15 × 18 cm
Additional information
Weight 60 kg
Dimensions 60 × 14 × 14 cm
Thickness

40 mil (1.0 mm)

Dimensions

39 in × 65 ft (1 m × 20 m)

Gross/Net Coverage

213 sq ft (20 sq m) / 194 sq ft (18 sq m)

Roll Weight

40 lb (20 kg)

Surface

Tri-laminated Woven polyethylene

Underface

Self-adhesive, covered with a split-back silicone release film

Weight 62 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

11.4 lbs

Solids by Weight*

71%

Drying Time (50% Relative Humidity & 70°F)

Touch/2.5 hrs – Firm/5 hrs minimum

Flammability

None

Wet Film

None

VOC

< 150 grams/liter

Elongation

>400%

Tensile Strength

400 PSI

Viscosity

120 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 62 lbs

Color

Tan, White

Size

5 Gallon

Weight 110 kg
Dimensions 60 × 14 × 14 cm
Thickness

141 mil (3.6 mm)

Dimensions

39 in × 33 ft (1 m × 10 m)

Gross/Net Coverage

107 sq ft (10 sq m)
99 sq ft (9.2 sq m)

Roll weight

86 lb (39 kg)

Surface

Granuled

Underface

Self-adhesive, covered with a split-back silicone release film

Ul 790*

TRC 950-C

Color

Tan, White

Weight 75 kg
Dimensions 15 × 15 × 18 cm
Weight 2.2 kg
Dimensions 15 × 15 × 18 cm
Color

White

Size

4" x 324', 6" x 324', 12" x 324', 20" x 324', 40" x 324'

Weight 44 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

8.0 lbs

Drying Time (50% Relative Humidity & 70°F)

Touch/2-3 hrs

Flammability

None

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 44 lbs.

Color

Clear

Size

5 Gallon