PRODUCT NO. 990 HIGH SOLID SILICONE TOPCOAT

  • High Solid Silicone Coating
  • Extreme Low Spot & Water Resistances
  • Rain Safe in 15 Minutes
  • 30-Year Limited Warranty
Sale!

$260.00

Login / Register for Additional Discounts

  • High Solid Silicone Coating
  • Extreme Low Spot & Water Resistances
  • Rain Safe in 15 Minutes
  • 30-Year Limited Warranty

Description

DESCRIPTION: PRODUCT NO. 990 is a 100% silicone, RTV moisture cure, waterproof roof coating which forms a monolithic barrier to the effects of degradation caused by normal weathering, aging and ultraviolet exposure. PRODUCT NO. 990 has excellent durability, color stability and chalk resistance. It is typically used as a protective coating for polyurethane foam or metal and new or existing roofs.

USES: PRODUCT NO. 990 FOREVER-COAT can be directly applied over most previously coated roof surfaces as well as exposed spray polyurethane foam, TPO, or EPDM follow surface preparation instructions below.

SURFACE PREPARATION: All surfaces to be coated should be free of dirt, dust, chalking paint, mortar spatter, all loose rust, all loose mill scale, old caulking, grease, oil, release agents, curing compounds, laitance and other foreign matter including frost. Surfaces should be power washed with appropriate detergent and rinsed prior to coating.

On asphalt based substrates, one coat of Tucson Rubberized Coatings Product #295 Stain Blocking Primer is highly recommended to prevent discoloring.

Roof surfaces need to be clean and dry. A 20 mil thickness will skin over in about 60 minutes and have sufficient strength to walk on for application of a second coat in about 4 to 6 hours.

APPLICATION: Mixing: PRODUCT NO. 990 is supplied as a one-part coating (no component mixing necessary). Mix by an air powered agitator (300 – 400 rpm) for a minimum of 5 minutes, to ensure an even consistency of coating is obtained without air in suspension.

Application: The temperature of the surface to be coated should be between 41 and 120°F (5 and 60°C) and environmental temperature should be at least 5°F (3°C) above the dew point prior to and during application.

When working with PRODUCT NO. 990 in high humidity and/or high temperature environments, it is recommended to use a pail lid adapter fitted with an agitator. This will prevent the product from skinning over and curing in the pail during application.

It is recommended that : PRODUCT NO. 990 be applied using an airless sprayer; however, brush, squeegee or roller are also suitable methods of application. It is necessary to apply at a rate that will achieve a minimum of 20 mils (508 μm)

STORAGE: Shelf Life: 12 months from date of manufacture in the original unopened container below 90°F (32°C). Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat or ignition. May be stored below freezing.

CLEAN-UP: Do not allow material to remain in hoses, gun or spray equipment. Thoroughly flush all equipment with Si-COAT equipment cleaner, naphtha or mineral spirits.

Fully cured coating is environmentally benign (will not harm) and is suitable for landfill disposal. However, always check local environmental regulations before disposal.

HANDLING PRECAUTIONS: Product safety information required for safe use is not included. Before handling, read product safety data sheets and container labels for safe use, physical and health hazard information. Safety data sheets are available on the TRC website at www.rubberized.com. You can also obtain a copy from one of our local TRC stores.

PHYSICAL PROPERTIES: Acrylic Elastomeric Roof Coating with Excellent Adhesion and Versatility.

Additional information

Solids by Volume (%)

94%

Approximate Theoretical Coverage (One Coat)

18.0 mils – 84 sq. ft./US gal.

Drying Time at 50% relative humidity and 70°F; Touch:

4 hrs, Firm: 12 hrs

Skin-Over Time

68 minutes

Flammability

None

Dry/Cure/Recoat Time

4-6 hours

Full Physical Characteristics

7 days

Elongation

> 250%

Tensile Strength

> 250 PSI

Tear Resistance

> 22 lbf/in.

Adhesion to SPF

3.55 pli

Contains Low Temperate Flexibility Performance

4.44 perms

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest