Product No. 750-Multi Purpose Cleaner

Product No. 750 Multi-Purpose Cleaner is a concentrated roof cleaner manufactured with high quality detergents. The combination of solvent emulsion and wide dilution range makes Product No. 750 Multi-Purpose Cleaner extremely versatile for application on a variety of roof substrates. Product No. 750 Multi-Purpose Cleaner is low toxic and free of petroleum solvents.

Recommended for all substrates. Including recoats, silicone, EPDM, TPO, asphalt based, tar, cap sheet, aluminum coated (removes oils to reduce the amount of bleed through) if rust is present, use a wire brush to clean the area first to utilize primer (297x) before coating.

Use Product No. 750 Multi-Purpose Cleaner to power wash surface once a year or at least every 18 months-24 months to ensure the longevity and highest reflectivity of your roof.

WHY USE OUR CLEANER…

  • Maintain maximum energy savings
  • Reduce structural heat transfer
  • Improving adhesion on re-coat & repairs
  • Extend the life of acrylic & silicone coatings
  • Noncorrosive
  • Biodegradable
  • Highly Concentrated
  • Nonflammable
  • Free Rinsing
pro750

$20.00

Login / Register for Additional Discounts

Product No. 750 Multi-Purpose Cleaner is a concentrated roof cleaner manufactured with high quality detergents. The combination of solvent emulsion and wide dilution range makes Product No. 750 Multi-Purpose Cleaner extremely versatile for application on a variety of roof substrates. Product No. 750 Multi-Purpose Cleaner is low toxic and free of petroleum solvents.

Recommended for all substrates. Including recoats, silicone, EPDM, TPO, asphalt based, tar, cap sheet, aluminum coated (removes oils to reduce the amount of bleed through) if rust is present, use a wire brush to clean the area first to utilize primer (297x) before coating.

Use Product No. 750 Multi-Purpose Cleaner to power wash surface once a year or at least every 18 months-24 months to ensure the longevity and highest reflectivity of your roof.

WHY USE OUR CLEANER…

  • Maintain maximum energy savings
  • Reduce structural heat transfer
  • Improving adhesion on re-coat & repairs
  • Extend the life of acrylic & silicone coatings
  • Noncorrosive
  • Biodegradable
  • Highly Concentrated
  • Nonflammable
  • Free Rinsing
In Stock. Ready for Delivery.

Description

FEATURES

  • Noncorrosive
  • Biodegradable
  • Highly Concentrated
  • Nonflammable
  • Free Rinsing

PRODUCT DESCRIPTION

PRODUCT NO. 750 MULTI-PURPOSE CLEANER is a concentrated roof cleaner manufactured with high quality detergents. The combination of solvent emulsion and wide dilution range makes PRODUCT NO. 750 MULTI-PURPOSE CLEANER extremely versatile for application on a variety of roof substrates. PRODUCT NO. 750 MULTI-PURPOSE CLEANER is low toxic and free of petroleum solvents.

DIRECTIONS

  1. Dilute with water according to soil conditions
  2. Dilutions: Light cleaning (1:80, ie. mix 1 part of PRODUCT NO. 750 MULTIPURPOSE CLEANER with 80 parts of water); Medium cleaning (1:60); Heavy cleaning (1:40); Extremely heavy soil (1:20)
  3. Application Method: mop, rag, sponge, sprayer, pressure washer or steam cleaner.
  4. Rinse with water or wipe clean with a rag or sponge.

NOTE: The concentration of PRODUCT NO. 750 MULTI-PURPOSE CLEANER is project-specific; higher concentrations may be required for proper cleaning.

APPLICATION

Aluminum, Cooper, Brass, Stainless Steel, Galvanized Steel, Mod. Bitumen APP, Mod. Bitumen SBS, BUR, TPO, EPDM, Painted Surfaces, Silicone Coated Roof, Acrylic Coated Roof, PU Coated Roof, PU Foam, Ceramic, Brick, Concrete, Exhaust Hoods and Fans, Glass and Plastic. Consult TRC for further product compatibility.

SAFETY PRECAUTIONS

This product is intended for use only by professional applicators in accordance with the advice given in this document, the Safety Data Sheet (SDS) and the container(s), and should not be used without reference to the SDS that TRC has provided to its customers. KEEP OUT OF REACH OF CHILDREN.

All work involving the application and use of this product should be performed in compliance with all relevant national, Health, Safety & Environmental standards & regulations.

If in doubt regarding the suitability of use of this product, consult TRC for further advice.

STORAGE

Store in areas that are clean, dry, and free of dust, dirt, and grease.

PACKAGING

PRODUCT NO. 750 MULTI-PURPOSE CLEANER is available in 15oz.bottles.

WARRANTY

TRC warrants that its products will meet its specifications. TRC shall in no event be liable for incidental or consequential damages. Except as expressly stipulated, TRC’s liability, expressed or implied, is limited to the stated selling price of any defective goods.

Data is subject to change without notice and it is therefore recommended that this information not be used for specification writing. For additional information on specific applications, contact the manufacturer.

Disclaimer

The information given in this sheet is not intended to be exhaustive and any person using the product for any purpose other than that specifically recommended in this document without first obtaining written confirmation from TRC as to the suitability of the product for the intended purpose does so at his/her own risk. The information contained herein has been prepared in good faith to comply with applicable federal and provincial (state) law(s). However, no warranty of any kind is given or implied and TRC will not be responsible for any damages, losses or injuries that may result from the use of any information contained herein. While TRC endeavors to ensure all advice it gives about the product (whether in this document or otherwise) is correct, we have no control over either the quality or condition of the substrate or the many factors affecting the use and ap-plication of the product. Therefore, unless TRC specifically agrees in writing to do so, it does not accept any liability whatsoever or howsoever arising for the performance of the product, or for any consequential loss or damage arising out of the use of the product. Any warranty, if given or specific Terms & Conditions of Sale are contained in TRC’s Terms & Conditions of Sale, a copy of which can be obtained upon request. The information contained herein is liable to modification from time-to-time in light of experience and TRC’s policy of continuous product improvement. It is the user’s responsibility to check that this document is current prior to using the product. This document must not be used for specification writing.

Additional information

Weight 1 kg
Dimensions 12 × 12 × 12 cm
Container Size

15oz

Quick Comparison

SettingsProduct No. 750-Multi Purpose Cleaner removeL PRO SOLUTION 9" PAINT ROLL COVER - 1.25" NAP removePRODUCT NO. 295-G STAIN BLOCKING PRIMER removePREMIER 9" HEAVY DUTY ROLLER FRAME removePRODUCT NO. 6000-QuickDry removeEssential RV Coating Bundle remove
Imagepro750LPRO 9in Roll CoverAcrylic saturant and Substrate primer product no 7000Premier 9in Roller Frame6000 qd 1image 6483441
SKURC9-1.25295OW5RFB96000W5-1
Rating
Price$20.00

Login / Register for Additional Discounts

$4.99

Login / Register for Additional Discounts

$70.00

Login / Register for Additional Discounts

$4.00

Login / Register for Additional Discounts

From $114.00

Login / Register for Additional Discounts

$75.00

Login / Register for Additional Discounts

Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Buying Options

Add to cart

Description

Product No. 750 Multi-Purpose Cleaner is a concentrated roof cleaner manufactured with high quality detergents. The combination of solvent emulsion and wide dilution range makes Product No. 750 Multi-Purpose Cleaner extremely versatile for application on a variety of roof substrates. Product No. 750 Multi-Purpose Cleaner is low toxic and free of petroleum solvents.

Recommended for all substrates. Including recoats, silicone, EPDM, TPO, asphalt based, tar, cap sheet, aluminum coated (removes oils to reduce the amount of bleed through) if rust is present, use a wire brush to clean the area first to utilize primer (297x) before coating.

Use Product No. 750 Multi-Purpose Cleaner to power wash surface once a year or at least every 18 months-24 months to ensure the longevity and highest reflectivity of your roof.

WHY USE OUR CLEANER...

  • Maintain maximum energy savings
  • Reduce structural heat transfer
  • Improving adhesion on re-coat & repairs
  • Extend the life of acrylic & silicone coatings
  • Noncorrosive
  • Biodegradable
  • Highly Concentrated
  • Nonflammable
  • Free Rinsing
  • 1-1/4" Nap
  • High Density Polyester Fabric
  • For Extra-Rough Surfaces
  • For All Primers & Flat Paints
  • Recommended for priming over asphalt based surfaces as well as concrete, metal, and aged roof coatings to prevent bleed through to the top coating
  • A penetrating sealer designed to provide a firm surface for application of wall coatings
  • Can be used to install polyester for complete roofing system
  • Which primer is right for me
  • 5 wire cage frame
  • Plastic handle with metal ferrule
  • Threaded handle for use with extension poles
  • Use with all 9 in. standard core rollers
  • Quick Dry Formula for abnormal weather conditions
  • An ultra white acrylic roof coating that forms a thick rubber-like shield
  • Offers excellent weatherproof protection due to its maximum resistance to ponded water conditions and high reflectivity
  • 10-Year limited manufacturers warranty

COMPLIES WITH:

compliance

astm

crrc

Content

FEATURES

  • Noncorrosive
  • Biodegradable
  • Highly Concentrated
  • Nonflammable
  • Free Rinsing

PRODUCT DESCRIPTION

PRODUCT NO. 750 MULTI-PURPOSE CLEANER is a concentrated roof cleaner manufactured with high quality detergents. The combination of solvent emulsion and wide dilution range makes PRODUCT NO. 750 MULTI-PURPOSE CLEANER extremely versatile for application on a variety of roof substrates. PRODUCT NO. 750 MULTI-PURPOSE CLEANER is low toxic and free of petroleum solvents.

DIRECTIONS

  1. Dilute with water according to soil conditions
  2. Dilutions: Light cleaning (1:80, ie. mix 1 part of PRODUCT NO. 750 MULTIPURPOSE CLEANER with 80 parts of water); Medium cleaning (1:60); Heavy cleaning (1:40); Extremely heavy soil (1:20)
  3. Application Method: mop, rag, sponge, sprayer, pressure washer or steam cleaner.
  4. Rinse with water or wipe clean with a rag or sponge.

NOTE: The concentration of PRODUCT NO. 750 MULTI-PURPOSE CLEANER is project-specific; higher concentrations may be required for proper cleaning.

APPLICATION

Aluminum, Cooper, Brass, Stainless Steel, Galvanized Steel, Mod. Bitumen APP, Mod. Bitumen SBS, BUR, TPO, EPDM, Painted Surfaces, Silicone Coated Roof, Acrylic Coated Roof, PU Coated Roof, PU Foam, Ceramic, Brick, Concrete, Exhaust Hoods and Fans, Glass and Plastic. Consult TRC for further product compatibility.

SAFETY PRECAUTIONS

This product is intended for use only by professional applicators in accordance with the advice given in this document, the Safety Data Sheet (SDS) and the container(s), and should not be used without reference to the SDS that TRC has provided to its customers. KEEP OUT OF REACH OF CHILDREN.

All work involving the application and use of this product should be performed in compliance with all relevant national, Health, Safety & Environmental standards & regulations.

If in doubt regarding the suitability of use of this product, consult TRC for further advice.

STORAGE

Store in areas that are clean, dry, and free of dust, dirt, and grease.

PACKAGING

PRODUCT NO. 750 MULTI-PURPOSE CLEANER is available in 15oz.bottles.

WARRANTY

TRC warrants that its products will meet its specifications. TRC shall in no event be liable for incidental or consequential damages. Except as expressly stipulated, TRC's liability, expressed or implied, is limited to the stated selling price of any defective goods.

Data is subject to change without notice and it is therefore recommended that this information not be used for specification writing. For additional information on specific applications, contact the manufacturer.

Disclaimer

The information given in this sheet is not intended to be exhaustive and any person using the product for any purpose other than that specifically recommended in this document without first obtaining written confirmation from TRC as to the suitability of the product for the intended purpose does so at his/her own risk. The information contained herein has been prepared in good faith to comply with applicable federal and provincial (state) law(s). However, no warranty of any kind is given or implied and TRC will not be responsible for any damages, losses or injuries that may result from the use of any information contained herein. While TRC endeavors to ensure all advice it gives about the product (whether in this document or otherwise) is correct, we have no control over either the quality or condition of the substrate or the many factors affecting the use and ap-plication of the product. Therefore, unless TRC specifically agrees in writing to do so, it does not accept any liability whatsoever or howsoever arising for the performance of the product, or for any consequential loss or damage arising out of the use of the product. Any warranty, if given or specific Terms & Conditions of Sale are contained in TRC's Terms & Conditions of Sale, a copy of which can be obtained upon request. The information contained herein is liable to modification from time-to-time in light of experience and TRC's policy of continuous product improvement. It is the user’s responsibility to check that this document is current prior to using the product. This document must not be used for specification writing.

DESCRIPTION: Professional-grade, 9" roller cover with high density polyester fabric for all Primers and Flat paints.

DESCRIPTION: Product No. 295-G STAIN SHIELD is a light gray, highly elastomeric asphalt stain shield and fabric saturant with excellent adhesion to new and existing asphalt roof systems; granulated modified bitumen; SPF (uncoated and acrylic coated); and metal. Product No. 295-G STAIN SHIELD is excellent for liquid applied polyester fabric overlay systems and should be used as a base coat, not being left exposed to the suns UV rays for extended periods of time.

USES: Product No. 295-G STAIN SHIELD is to be used as a base coat primer over asphalt, tar, hot-applied built-up roofing, granulated cap sheet, steel, and aluminum roofing substrates. Product No. 295-G STAIN SHIELD can also be used as a fabric saturant when installing a fabric overlay system.

SURFACE PREPARATION: Roof substrates must be clean, dry, free of all debris, and any contaminates which would impede proper adhesion. A pressure wash is recommended, if a pressure washer is not available a cleaning agent should be used in conjunction with hose and broom washing. In addition to pressure washing, a wire brush should be used to remove any surface rust on metal roofing systems. Metal panels where the structural integrity has been compromised should be removed and replaced with like panels. A bleach and water solution (1 part bleach to 2 parts water) should be used to treat any roof areas that have mildew or algae. All roof surfaces should be thoroughly cleaned and allowed to dry completely prior to application of any Tucson Rubberized Coatings restoration products.

APPLICATION: Proper protective clothing and PPE should be worn when applying products. It is normal to see a small amount of separation when first opening a pail. If necessary, gently mix the product with a roller frame or paddle mixer, being careful to not introduce air into the product during mixing. Product can be applied by roller (3/4 - 1 1/4" nap), brush, and spray equipment capable of 2000 - 3000 PSI and 1 - 3 GPM of output. For best results when spraying, an 8-31 - 8-41 reversible spray is recommended. Do not dilute product. Tucson Rubberized Coatings Products should not be applied when freezing temperatures or rain is expected within 24 hours of completed application. During application, roof surface temperatures should be between 40 and 115 degrees Fahrenheit, with no moisture present.

RECOMMENDED COVERAGE RATES (completed in 2 coats): Product should be applied at a minimum rate of 1 -1.5 gallons per 100 square feet of roof surface, per coat. When used as a fabric saturant, Product No. 295-G STAIN SHIELD should completely saturate the fabric by embedding the fabric between two coats at a minimum of 1 - 1.5 gal per 100 square feet per coat. Coverage rates will depend on the porosity of the roofing substrate.

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

STORAGE: Product should be stored in a clean and dry area, away from direct sunlight and protected from freezing.

CLEAN-UP: Clean brushes, tools, and other equipment with warm soapy water immediately after use. Dried film may require paint remover.

PHYSICAL PROPERTIES: Bleed-Blocking Primer and Fabric Saturant

HANDLING PRECAUTIONS: Product safety information required for safe use is not included. Before handling, read product safety data sheets and container labels for safe use and health hazard information. Safety data sheets are available on the TRC website at: www.rubberized.com.

LIMITED WARRANTY AND DISCLAIMER: To the best of our knowledge, the technical data contained herein is true and accurate at the date of issuance and is subject to change without prior notice. User must contact Tucson Rubberized Coatings to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. Liability, if any, is limited to replacement of product unless installed by an approved contractor in accordance with Tucson Rubberized Coatings warranty procedures and program. For limited manufacturer's warranty and disclaimer information, visit our website at: www.rubberized.com.

DESCRIPTION: Heavy-duty roller frame for use with all 9 in. standard core roller covers. Five wire cage with plastic end caps. Threaded comfort grip plastic handle with metal ferrule for additional strength when adding extension poles.

DESCRIPTION. PRODUCT NO. 6000 Quick Dry is a durable 100% acrylic elastomeric roof coating in a quick dry version than can withstand light to moderate rain within 15-30 minutes. PRODUCT NO. 6000 Quick Dry is designed for maximum protection against sun and extreme weather. Its bright white fi nish enables it to defl ect the sunʼs heat and harmful UV rays, protecting the roof substrate and lowering energy bills. PRODUCT NO. 6000 Quick Dry forms a thick, rubber-like shield that expands and contracts greater than 220% to prevent cracking and slow the aging process. PRODUCT NO. 6000 Quick Dry resists cracking, peeling, and mildew while providing excellent protection against extreme weather.

USES. PRODUCT NO. 6000 Quick Dry can be used directly over spray polyurethane foam and most previously coated roof surfaces. PRODUCT NO. 6000 Quick Dry should not be applied over 100% silicone. When applying over aluminum roof coating, asphalt, tar, hot applied built-up roofi ng, granulated cap sheet, and metal roofi ng systems, TPO, or EPDM follow surface preparation instructions below.

SURFACE PREPARATION. Roof substrates must be clean, dry, free of all debris, and any contaminants which would impede proper adhesion. A pressure wash is recommended, if a pressure washer is not available a cleaning agent should be used in conjunction with hose and broom washing. In addition to pressure washing, a wire brush should be used to remove any surface rust on metal roofi ng systems. Metal panels where the structural integrity has been compromised should be removed and replaced with like panels. A bleach and water solution (1 part bleach to 2 parts water) should be used to treat any roof areas that have mildew or algae. All roof surfaces should be thoroughly cleaned and allowed to dry completely prior to application of any Tucson Rubberized Coatings products. Over aluminum roof coating, asphalt, tar, hot-applied built-up roofi ng, granulated cap sheet, and metal roofi ng systems, one coat of PRODUCT NO. 295-G STAIN SHIELD or PRODUCT NO. 297-X X-TREME must be applied prior to the application of PRODUCT NO. 6000 Quick Dry. All large cracks and seams should be repaired by embedding one layer of polyester fabric between two layers of PRODUCT NO. 501-W-P ACRYLIC MASTIC or PRODUCT NO. 510 REINFORCED ACRYLIC MASTIC prior to application of PRODUCT NO. 6000 Quick Dry. To achieve proper adhesion over TPO, PVC, or EPDM, one coat of PRODUCT NO. 297-X X-TREME must be applied prior to any Tucson Rubberized Coatings repair or top coat products.

APPLICATION. Proper protective clothing and PPE should be worn when applying products. It is normal to see a small amount of separation when fi rst opening a pail. If necessary, gently mix the product with a roller frame or paddle mixer, being careful to not introduce air into the product during mixing. Product can be applied by roller (3/4 - 1 1/4” nap), brush, and spray equipment capable of 2000 - 3000 PSI and 1-3 GPM of output. For best results when spraying, an 8-31 or -8-41 reversible spray is recommended. Do not dilute product. Tucson Rubberized Coatings Products should not be applied when freezing temperatures or rain is expected within 24 hours of completed application. During application, roof surface temperatures should be between 40 and 115 degrees Fahrenheit, with no moisture present.

RECOMMENDED COVERAGE RATES (completed in 2 coats): PRODUCT NO. 6000 Quick Dry should be applied at a minimum rate of 1 - 1 ½ gallons per 100 square feet of roof surface, per coat. The fi rst coat should be allowed to cure approximately 24 hours before a second coat is applied. The second coat should be applied perpendicular to the fi rst coat (cross hatch application). Two coats applied at the specifi ed rate are required to obtain a Limited Manufacturer Material Warranty. Coverage rates will depend on porosity of the roofi ng substrate. Final Dry Film Thickness (DFT) will

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

STORAGE: Product should be stored in a clean and dry area, away from direct sunlight and protected from freezing.

CLEAN-UP: Clean brushes, tools and other equipment with warm soapy water immediately after use. Dried fi lm may require paint remover.

HANDLING PRECAUTIONS: Product safety information required for safe use is not included. Before handling, read product safety data sheets and container labels for safe use, physical and health hazard information. Safety data sheets are available on the TRC website at www.rubberized.com. You can also obtain a copy from one of our local TRC stores.

PRODUCT: 700 ULTIMATE RV ROOF COATING

  • Manufactured to adhere to common RV roofs including EPDM and TPO when used with 297-X primer
  • Ultra white that remains whiter than any coating in its class
  • Maximum adhesion, strength, and elasticity to resist cracking and peeling
  • Maximum bleed block technology with no yellowing or staining over all tested substrates
  • 5-Year limited manufacturers warranty

PRODUCT NO 297-X ULTIMATE ADHESION ACRYLIC PRIMER

  • Creates a waterproofing membrane for areas with frequent standing water
  • X-TREME adhesion primer for a variety of substrates including new and aged EPDM, TPO, and Spray Polyurethane Foam
  • Excellent bleed block resistance to eliminate top coat discoloration over asphalt
  • Which primer is right for me

TIETEX POLYESTER ROOFING MEMBRANE – REINFORCEMENT ROOFING FABRIC

  • 6″ x 324′
  • Tietex polyester fabric is a stitch-bonded, high-performance fabric
  • Used in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic
  • The polyester fabric is white with lay lines for one and two-ply roof systems

PREMIER 4″ FLAT SASH PAINT BRUSH

  • Polyester bristles provide superior control
  • Durable and easy to clean
  • Can be used with interior or exterior paints
Weight10.15540.71575
Dimensions12 × 12 × 12 cm12 × 12 × 12 cm15 × 15 × 18 cm12 × 12 × 12 cm15 × 18 × 16 cm15 × 15 × 18 cm
Additional information
Weight 1 kg
Dimensions 12 × 12 × 12 cm
Container Size

15oz

Weight 0.15 kg
Dimensions 12 × 12 × 12 cm
Weight 54 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

8.9 lbs

Solids by Weight*

38%

Drying Time (50% Relative Humidity & 70°F)

Touch/2 hrs – Firm/4 hrs minimum

Flammability

None

Wet Film

None

VOC

< 150 grams/liter

Elongation

>300%

Tensile Strength

450 PSI

Viscosity

115 – 125 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallon bucket weight approximately 50 lbs

Color

Off-White

Size

5 Gallon

Solids by Volume (%)

34%

Silicone (%)

None

Tear Resistance

> 120 lbf/in.

Water Swelling After 7 days

< 15%

Weight 0.7 kg
Dimensions 12 × 12 × 12 cm
Weight 15 kg
Dimensions 15 × 18 × 16 cm
Weight per Gallon

11.4 lbs

Solids by Weight*

71%

Drying Time (50% Relative Humidity & 70°F)

Touch/2.5 hrs – Firm/5 hrs minimum

Flammability

None

Wet Film

None

VOC

< 150 grams/liter

Elongation

>300%

Tensile Strength

300 PSI

Viscosity

120 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 58 lbs.

Color

tan, white

Size

5 Gallon

Weight 75 kg
Dimensions 15 × 15 × 18 cm