PRODUCT NO. 550 PUDDLE FILLER

PRODUCT NO. 550 PUDDLE FILLER

$60.00

  • A premium quality elastomeric patching compound
  • Polyester reinforced blend of Acrylic polymers with a high solid content with polyester fibers
  • Can be used as a patching compound for filling voids and for filling gaps in parapet walls, sealing around penetrations, or for sealing drains and scuppers

Description

DESCRIPTION. PRODUCT NO. 550 is a premium quality lightweight elastomeric puddle filler designed for use on flat to low sloped roofs. This 100% acrylic polymer ensures the highest elongation and elasticity as well as water resistance.

USES. This puddle filler is used to fill low spots without adding unnecessary weight to the roof.

SURFACE PREPARATION. All surfaces to receive this product must be scrubbed clean so that they are free from oil, grease, rust, scale, loose paint and dirt.

APPLICATION. Pour the product into low spot at a depth of up to 1/2″. If low spot is greater than 1/2″ deep, it is recommended to address structurally according to local codes/ordinances. If this product is used in these situations, build up in separate layers of 1/2″ thickness until desired thickness is achieved. Cure time will depend on temperature, thickness, and humidity, but the range of dry time can be 24 hours to several weeks. Once cured, apply two coats of a TUCSON RUBBERIZED COATINGS top coating.

CLEAN-UP. All equipment should be cleaned right away after use with soap and water.

Additional information

Weight57 lbs
Dimensions13 × 13 × 17 in
Weight per Gallon

11.0 lbs

Solids by Weight*

80%

Drying Time (50% Relative Humidity & 70°F)

Touch/6 hrs

Flammability

None

VOC

< 150 grams/liter

Viscosity

90 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 57 lbs.

Color

Size

Call Now ButtonCall Now
All search results