PRODUCT NO. 285 WATER SEALER & REPELLENT

  • Water-based silane/siloxane water repellent
  • Can be used in lightweight concrete and mortar joints
  • Does not alter the appearance of surfaces
  • Designed to seal porous surfaces; Brick, Block, Adobe
SAVE 11%
Silane/siloxane water repellent product-285

$80.87

Login / Register for Additional Discounts

  • Water-based silane/siloxane water repellent
  • Can be used in lightweight concrete and mortar joints
  • Does not alter the appearance of surfaces
  • Designed to seal porous surfaces; Brick, Block, Adobe
In Stock. Ready for Delivery.

Description

DESCRIPTION. PRODUCT NO. 285 can seal porous surfaces such as brick, block, adobe or concrete, and pavers.

USES. PRODUCT NO. 285 is excellent for use as a protective sealer against water on nearly any surface. Surfaces this product can be used to protect against water include brick, block, adobe or concrete, pavers and wood decks.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules or peeling paint, as well as all other foreign matter. Use wire brushing, sanding or power washing to prepare surfaces.

APPLICATION. Power mix the water sealer and repellent to an even mixture. Apply to surface with a stiff brush, roller or airless sprayer to desired surface. Also, keep the brush or roller moist for easy application. Do not apply product when rain or frost is forecast within 24 hours. Apply only when the temperature is 50 degrees and rising.

KEEP PRODUCT FROM FREEZING

CLEAN-UP. Use soap and water to clean all equipment immediately after use. If you have dried film, then you may need to use paint remover.

Additional information

Weight 44 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

8.0 lbs

Drying Time (50% Relative Humidity & 70°F)

Touch/2-3 hrs

Flammability

None

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 44 lbs.

Color

Clear

Size

5 Gallon

Quick Comparison

SettingsPRODUCT NO. 285 WATER SEALER & REPELLENT removePREMIER 4" FLAT SASH PAINT BRUSH removePRODUCT 600-T RUBBERIZED STUCCO removePRODUCT NO. 6000 ACRYLIC TOPCOAT removeProduct No. 750-Multi Purpose Cleaner removePRODUCT NO. 302 ACRYLIC TOPCOAT remove
ImageSilane/siloxane water repellent product-285Premier 4in Paint BrushTuff Tex Rubberized synthetic stucco product no 600-TSil coat roof coating product no 6000pro750Enviro coat roof coating product no. 302
SKU285C5PBFSB4600-TW56000W5302W5
Rating
Price $80.87

Login / Register for Additional Discounts

$4.99

Login / Register for Additional Discounts

$69.00

Login / Register for Additional Discounts

From $94.00

Login / Register for Additional Discounts

$20.00

Login / Register for Additional Discounts

From $71.00

Login / Register for Additional Discounts

Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Buying Options

Add to cart

Buying Options

Description
  • Water-based silane/siloxane water repellent
  • Can be used in lightweight concrete and mortar joints
  • Does not alter the appearance of surfaces
  • Designed to seal porous surfaces; Brick, Block, Adobe
  • Polyester bristles provide superior control
  • Durable and easy to clean
  • Can be used with interior or exterior paints
  • Creates a thick textured rubber-like shield of protection
  • Insulates and resists cracking and chipping
  • Will adhere to any primed surface
  • White can be tinted for an extra charge (Available in-store only)
  • 15-Year limited manufacturers warranty
  • An ultra white acrylic roof coating that forms a thick rubber-like shield
  • Expands and contracts over 300% to prevent roof damage
  • Offers excellent weatherproof protection due to its maximum resistance to ponded water conditions and high reflectivity
  • 10-Year limited manufacturers warranty

COMPLIES WITH:

compliance

astm

crrc

Product No. 750 Multi-Purpose Cleaner is a concentrated roof cleaner manufactured with high quality detergents. The combination of solvent emulsion and wide dilution range makes Product No. 750 Multi-Purpose Cleaner extremely versatile for application on a variety of roof substrates. Product No. 750 Multi-Purpose Cleaner is low toxic and free of petroleum solvents.

Recommended for all substrates. Including recoats, silicone, EPDM, TPO, asphalt based, tar, cap sheet, aluminum coated (removes oils to reduce the amount of bleed through) if rust is present, use a wire brush to clean the area first to utilize primer (297x) before coating.

Use Product No. 750 Multi-Purpose Cleaner to power wash surface once a year or at least every 18 months-24 months to ensure the longevity and highest reflectivity of your roof.

WHY USE OUR CLEANER...

  • Maintain maximum energy savings
  • Reduce structural heat transfer
  • Improving adhesion on re-coat & repairs
  • Extend the life of acrylic & silicone coatings
  • Noncorrosive
  • Biodegradable
  • Highly Concentrated
  • Nonflammable
  • Free Rinsing
  • 100% acrylic with flexibility and reflectivity to protect the roof surface
  • Reduces interior temperatures
  • Reduces home cooling expenses
  • 5-Year limited manufacturers warranty
Content

DESCRIPTION. PRODUCT NO. 285 can seal porous surfaces such as brick, block, adobe or concrete, and pavers.

USES. PRODUCT NO. 285 is excellent for use as a protective sealer against water on nearly any surface. Surfaces this product can be used to protect against water include brick, block, adobe or concrete, pavers and wood decks.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules or peeling paint, as well as all other foreign matter. Use wire brushing, sanding or power washing to prepare surfaces.

APPLICATION. Power mix the water sealer and repellent to an even mixture. Apply to surface with a stiff brush, roller or airless sprayer to desired surface. Also, keep the brush or roller moist for easy application. Do not apply product when rain or frost is forecast within 24 hours. Apply only when the temperature is 50 degrees and rising.

KEEP PRODUCT FROM FREEZING

CLEAN-UP. Use soap and water to clean all equipment immediately after use. If you have dried film, then you may need to use paint remover.

DESCRIPTION: Provides a superb finish at an attractive price. Polyester bristles allow you to apply paint with superior control.

Can be used with interior or exterior paints.

DESCRIPTION. PRODUCT NO. 600-T creates a thick rubber-like shield of protection which is highly resistant to cracking or chipping. This rubberized stucco product also contains bonding agents which give it excellent adhesion and ceramics for insulating properties.

USES. This rubberized stucco product is excellent for use as a complete interior or exterior wall finish, as well as for repairing existing walls. It is paintable, or you may also have it pre-tinted to a color of your choice to eliminate expensive repainting. PRODUCT NO. 600-T can be applied in various types of finishes and is ideal for beautifying virtually any surface, such as existing stucco, masonry, block, brick, metal, plywood, OSB, or wood siding.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules, or peeling paint and all other foreign matter. You can use wire brushing, sanding, or power washing in order to prepare the surface. All cracks, joints, or uneven surfaces should be filled with PRODUCT NO. 501-W-P Patching Compound or PRODUCT NO. 400 Smooth Base Coat can be applied prior to applying PRODUCT NO. 600-T for filling hairline cracks, waterproofing, and providing additional insulation.

APPLICATION. Power mix product to an even mixture, then apply to surface with a stiff brush, roller, trowel, or hopper gun depending on the desired surface. Keep the brush or roller moist for easy application. If you want a thinner texture, then reduce viscosity with PRODUCT NO. 290 Surface Bonder. Apply PRODUCT NO. 600-T at a rate of 5-8 gallons per 100 sq. ft., depending on the desired thickness and finish. This product should not be applied when rain or frost is forecasted within 24 hours. Apply only when the temperature is 55 degrees and rising.

KEEP PRODUCT FROM FREEZING

CLEAN-UP. Clean brushes, tools, and other equipment with soapy water immediately after use.

DESCRIPTION. Dura-Coat Roof Coating is an ultra-white 100% acrylic elastomeric roof coating. This premium grade coating is designed for maximum protection against sun and weather. Its bright finish enables it to reflect the sun’s heat and harmful UV rays. This acrylic topcoat product forms a thick, rubber-like shield that expands and contracts over 300% to prevent roof damage. It resists cracking, peeling, and mildew while offering unbeatable weatherproof protection and excellent resistance to lifting under ponding water conditions.

USES. Dura-Coat Roof Coating can be used over mineral surface roofing, aged aluminum, tar, asphalt, or hot-applied built-up roofing after application of PRODUCT NO. 210 emulsion. All large cracks and seams should be reinforced with woven polyester fabric embedded into PRODUCT NO. 210. (on EPDM roofs, embed membrane over any large crack or seams into PRODUCT NO. 6000). This product can be directly applied over most previously white-coated sound roof surfaces. This acrylic topcoat is highly recommended for EPDM roofs or areas subject to unusually severe moisture conditions such as valleys, around roof drains, low spots or in any area where water is expected to be trapped on a roof.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules, gravel or peeling paint and all other foreign matter. Rusty metal must be cleaned with a wire brush and primed with PRODUCT NO. 101 Asphalt primer prior to application of PRODUCT NO. 210 emulsion and PRODUCT NO. 6000 Dura-Coat Roof Coating. Polyurethane Foam Roofs: Prime surface with PRODUCT NO. 295 surface conditioner prior to application of PRODUCT NO. 6000. Pressure washing surfaces is recommended for best results. Surfaces with any mildew growth or stains should be cleaned with a bleach solution (2 parts water to one part bleach) prior to applying this product. Be certain all surfaces are thoroughly rinsed and dry prior to coating application.

APPLICATION. Material should be stirred in the container and applied by a soft bristle brush or broom, a long nap roller or suitable spray equipment (minimum working pressure of 3000 PSI for airless sprayer). Coverage rates will vary depending on porosity of surface as well as roof pitch. Recommended application is two coats applied at right angles to previous coat by brush, roller or spray for maximum reflectivity, durability and life cycles. First coat must dry before second coat is applied. During application, keep tools clean and free from coating build up by rinsing frequently with water. Adequate protection for most surfaces is obtained by the use of two gallons of Dura-Coat Roof Coating per 100 sq. ft. applied in two coats.

Allow 24 to 72 hours depending on weather conditions and applications rate of curing prior to application of second coat. Do not apply unless temperature is 55°F and rising. Do not apply when rain or frost is forecast within 24 hours after application. Conditions of high humidity will prevent curing in the usual four hours. Avoid heavy foot traffic.

KEEP PRODUCT FROM FREEZING.

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

CLEAN-UP. Clean brushes, tools and other equipment with soapy water immediately after using this acrylic topcoat product. However, dried film may require paint remover.

FEATURES

  • Noncorrosive
  • Biodegradable
  • Highly Concentrated
  • Nonflammable
  • Free Rinsing

PRODUCT DESCRIPTION

PRODUCT NO. 750 MULTI-PURPOSE CLEANER is a concentrated roof cleaner manufactured with high quality detergents. The combination of solvent emulsion and wide dilution range makes PRODUCT NO. 750 MULTI-PURPOSE CLEANER extremely versatile for application on a variety of roof substrates. PRODUCT NO. 750 MULTI-PURPOSE CLEANER is low toxic and free of petroleum solvents.

DIRECTIONS

  1. Dilute with water according to soil conditions
  2. Dilutions: Light cleaning (1:80, ie. mix 1 part of PRODUCT NO. 750 MULTIPURPOSE CLEANER with 80 parts of water); Medium cleaning (1:60); Heavy cleaning (1:40); Extremely heavy soil (1:20)
  3. Application Method: mop, rag, sponge, sprayer, pressure washer or steam cleaner.
  4. Rinse with water or wipe clean with a rag or sponge.

NOTE: The concentration of PRODUCT NO. 750 MULTI-PURPOSE CLEANER is project-specific; higher concentrations may be required for proper cleaning.

APPLICATION

Aluminum, Cooper, Brass, Stainless Steel, Galvanized Steel, Mod. Bitumen APP, Mod. Bitumen SBS, BUR, TPO, EPDM, Painted Surfaces, Silicone Coated Roof, Acrylic Coated Roof, PU Coated Roof, PU Foam, Ceramic, Brick, Concrete, Exhaust Hoods and Fans, Glass and Plastic. Consult TRC for further product compatibility.

SAFETY PRECAUTIONS

This product is intended for use only by professional applicators in accordance with the advice given in this document, the Safety Data Sheet (SDS) and the container(s), and should not be used without reference to the SDS that TRC has provided to its customers. KEEP OUT OF REACH OF CHILDREN.

All work involving the application and use of this product should be performed in compliance with all relevant national, Health, Safety & Environmental standards & regulations.

If in doubt regarding the suitability of use of this product, consult TRC for further advice.

STORAGE

Store in areas that are clean, dry, and free of dust, dirt, and grease.

PACKAGING

PRODUCT NO. 750 MULTI-PURPOSE CLEANER is available in 15oz.bottles.

WARRANTY

TRC warrants that its products will meet its specifications. TRC shall in no event be liable for incidental or consequential damages. Except as expressly stipulated, TRC's liability, expressed or implied, is limited to the stated selling price of any defective goods.

Data is subject to change without notice and it is therefore recommended that this information not be used for specification writing. For additional information on specific applications, contact the manufacturer.

Disclaimer

The information given in this sheet is not intended to be exhaustive and any person using the product for any purpose other than that specifically recommended in this document without first obtaining written confirmation from TRC as to the suitability of the product for the intended purpose does so at his/her own risk. The information contained herein has been prepared in good faith to comply with applicable federal and provincial (state) law(s). However, no warranty of any kind is given or implied and TRC will not be responsible for any damages, losses or injuries that may result from the use of any information contained herein. While TRC endeavors to ensure all advice it gives about the product (whether in this document or otherwise) is correct, we have no control over either the quality or condition of the substrate or the many factors affecting the use and ap-plication of the product. Therefore, unless TRC specifically agrees in writing to do so, it does not accept any liability whatsoever or howsoever arising for the performance of the product, or for any consequential loss or damage arising out of the use of the product. Any warranty, if given or specific Terms & Conditions of Sale are contained in TRC's Terms & Conditions of Sale, a copy of which can be obtained upon request. The information contained herein is liable to modification from time-to-time in light of experience and TRC's policy of continuous product improvement. It is the user’s responsibility to check that this document is current prior to using the product. This document must not be used for specification writing.

DESCRIPTION. Enviro-Coat Roof Coating is a 100% acrylic roof coating that creates a durable sun reflective coating. The high reflective value of this acrylic topcoat helps to reduce interior temperature and protects the roof and roofing membrane by reducing heat absorption, asphalt oxidation and rapid thermal dimensional changes. It also decreases the chance of excessive loads being placed on cooling equipment.

USES. Enviro-Coat Roof Coating is specially designed to provide a tough weather resistant and decorative finish for mobile home tile and bituminous roof surfaces. This acrylic topcoat may be used over degreased or weathered aluminum, galvanized steel, primed steel, treated unweathered or weathered concrete. It can also be used on cured cold applied asphalt coatings, smooth surface roofings, and most prepared mineral surfaced roofings. This product can be directly applied over most previously white-coated sound roof surfaces.

SURFACE PREPARATION. A clean surface is absolutely essential for proper adhesion of this acrylic topcoat. In order to ensure a clean surface, follow these instructions.

(1) Previously coated surfaces: All dirt and unsound accumulations must be removed. Thus, you can use TSP to remove any mildew or algae which may be present. Rinse with water. Where necessary, use a broom and high pressure water hosing in order to clean the base surface. Allow water to completely dry before proceeding. Roof substrate must drain within 48 hours.

(2) Built-up Roofing: Must be 6 months or older. Clean and prime first with 1 gallon per 100 square feet of PRODUCT NO. 210, before application of finished white surfacing.

(3) Granule Surface: Must be clean, sound surface with no loose or foreign material.

(4) Rusty metal must be cleaned with a wire brush and primed with PRODUCT NO. 101. Asphalt primer prior to application of PRODUCT NO. 210 emulsion and PRODUCT NO. 302 Enviro-Coat Roof Coating. All fasteners must be tightly secured or replaced and encapsulated with PRODUCT NO. 501-W Patching Compound. In addition, all roof seams and flashings must be covered with PRODUCT NO. 501-W Patching Compound and membrane reinforcement.

APPLICATION. Stir in container until uniform in color and consistency. For Brushing: Use a soft nylon bristle broom or brush and apply with long even strokes. Avoid over-brushing. Do not attempt to retouch while film is drying. Wait until cured before applying second coat. For Roller: Medium to long nap for textured or rough surfaces. For Spray: Airless spray system with a minimum working pressure of 3000 PSI. Coverage rates will vary depending on porosity of surface as well as roof pitch. One coat can suffice, however, two coats are recommended for maximum reflectivity, durability and life cycle. Recommended application is two coats applied at right angles to previous coat by brush, roller or spray. First coat must dry before second coat is applied.

During application, keep tools clean and free from coating build up by rinsing frequently with water. Do not apply over uncured cold applied asphalt coating, wooden shingles, shakes, flood coats of hot melt asphalt or coal tar, or bare or rusted steel. Asphalt must be dull, not glossy. Do not apply unless temperature is 50°F and rising. Do not apply when rain or frost is forecast within 24 hours after application. In addition, conditions of high humidity will prevent curing in the usual four hours. Avoid heavy foot traffic.

RECOMMENDED COVERAGE RATES. (1) Mineral Surfaced Roll Roofing – 3 gal/ 100 sq. ft.; (2) Metal Roofing – 1 to 2 gal/100 sq. ft.; (3) Concrete Tile or Smooth Roll Roofing – 1.5 to 2 gal/100 sq. ft. (4) Re-coats 2 gallons per 100 sq. ft.

KEEP PRODUCT FROM FREEZING.

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

CLEAN-UP. Use soapy water in order to clean brushes, tools and other equipment immediately after use. However, dried film may require paint remover.

Weight440.48058154
Dimensions15 × 15 × 18 cm12 × 12 × 12 cm15 × 15 × 18 cm15 × 15 × 18 cm12 × 12 × 12 cm15 × 15 × 18 cm
Additional information
Weight 44 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

8.0 lbs

Drying Time (50% Relative Humidity & 70°F)

Touch/2-3 hrs

Flammability

None

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 44 lbs.

Color

Clear

Size

5 Gallon

Weight 0.4 kg
Dimensions 12 × 12 × 12 cm
Weight 80 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

15.7 lbs

Solids by Weight*

79%

Drying Time (50% Relative Humidity & 70°F)

Touch/2-3 hrs

Flammability

None

VOC

< 150 grams/liter

Viscosity

120 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 80 lbs.

Color

White

Size

5 Gallon

Weight 58 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

11.4 lbs

Solids by Weight*

71%

Drying Time (50% Relative Humidity & 70°F)

Touch/2.5 hrs – Firm/5 hrs minimum

Flammability

None

Wet Film

None

VOC

< 150 grams/liter

Elongation

>300%

Tensile Strength

300 PSI

Viscosity

120 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 58 lbs.

Color

tan, white

Size

5 Gallon

Weight 1 kg
Dimensions 12 × 12 × 12 cm
Container Size

15oz

Weight 54 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

10.5 lbs

Solids by Weight*

56%

Drying Time (50% Relative Humidity & 70°F)

Touch/2 hrs – Firm/4 hrs minimum

Flammability

None

Wet Film

None

VOC

< 150 grams/liter

Elongation

>200%

Tensile Strength

300 PSI

Viscosity

100 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 54 lbs.

Color

Tan, White

Size

5 Gallon