PRODUCT 600-T RUBBERIZED STUCCO

  • Creates a thick textured rubber-like shield of protection
  • Insulates and resists cracking and chipping
  • Will adhere to any primed surface
  • White can be tinted for an extra charge (Available in-store only)
  • 15-Year limited manufacturers warranty
SAVE 13%
Tuff Tex Rubberized synthetic stucco product no 600-T

$69.00

Login / Register for Additional Discounts

  • Creates a thick textured rubber-like shield of protection
  • Insulates and resists cracking and chipping
  • Will adhere to any primed surface
  • White can be tinted for an extra charge (Available in-store only)
  • 15-Year limited manufacturers warranty
In Stock. Ready for Delivery.

Description

DESCRIPTION. PRODUCT NO. 600-T creates a thick rubber-like shield of protection which is highly resistant to cracking or chipping. This rubberized stucco product also contains bonding agents which give it excellent adhesion and ceramics for insulating properties.

USES. This rubberized stucco product is excellent for use as a complete interior or exterior wall finish, as well as for repairing existing walls. It is paintable, or you may also have it pre-tinted to a color of your choice to eliminate expensive repainting. PRODUCT NO. 600-T can be applied in various types of finishes and is ideal for beautifying virtually any surface, such as existing stucco, masonry, block, brick, metal, plywood, OSB, or wood siding.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules, or peeling paint and all other foreign matter. You can use wire brushing, sanding, or power washing in order to prepare the surface. All cracks, joints, or uneven surfaces should be filled with PRODUCT NO. 501-W-P Patching Compound or PRODUCT NO. 400 Smooth Base Coat can be applied prior to applying PRODUCT NO. 600-T for filling hairline cracks, waterproofing, and providing additional insulation.

APPLICATION. Power mix product to an even mixture, then apply to surface with a stiff brush, roller, trowel, or hopper gun depending on the desired surface. Keep the brush or roller moist for easy application. If you want a thinner texture, then reduce viscosity with PRODUCT NO. 290 Surface Bonder. Apply PRODUCT NO. 600-T at a rate of 5-8 gallons per 100 sq. ft., depending on the desired thickness and finish. This product should not be applied when rain or frost is forecasted within 24 hours. Apply only when the temperature is 55 degrees and rising.

KEEP PRODUCT FROM FREEZING

CLEAN-UP. Clean brushes, tools, and other equipment with soapy water immediately after use.

Additional information

Weight 80 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

15.7 lbs

Solids by Weight*

79%

Drying Time (50% Relative Humidity & 70°F)

Touch/2-3 hrs

Flammability

None

VOC

< 150 grams/liter

Viscosity

120 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 80 lbs.

Color

White

Size

5 Gallon

Quick Comparison

SettingsPRODUCT 600-T RUBBERIZED STUCCO remove5' WOOD EXTENSION POLE removePRODUCT NO 297-X ULTIMATE ADHESION ACRYLIC PRIMER remove5 GALLON BUCKET LID OPENER removePRODUCT NO. 295-G STAIN BLOCKING PRIMER removePRODUCT NO. 10000 ULTRA DURABLE w/ ADVANCED WEATHERING TECHNOLOGY remove
ImageTuff Tex Rubberized synthetic stucco product no 600-T6ft Wood Ext Poleproduct 2975gal bucket openerAcrylic saturant and Substrate primer product no 7000Product~10000
SKU600-TW5EPW6297-xLOR5295OW510000
Rating
Price $69.00

Login / Register for Additional Discounts

$5.00

Login / Register for Additional Discounts

From $25.00

Login / Register for Additional Discounts

$2.99

Login / Register for Additional Discounts

$70.00

Login / Register for Additional Discounts

From $146.00

Login / Register for Additional Discounts

Stock
Availability
Add to cart

Add to cart

Add to cart

Buying Options

Add to cart

Add to cart

Buying Options

Description
  • Creates a thick textured rubber-like shield of protection
  • Insulates and resists cracking and chipping
  • Will adhere to any primed surface
  • White can be tinted for an extra charge (Available in-store only)
  • 15-Year limited manufacturers warranty
  • 5 ft. wood construction
  • Strong and durable
  • Does not conduct electricity
  • Versatile tool accommodates a variety of attachments (paint rollers, brooms or mops)
  • Creates a waterproofing membrane for areas with frequent standing water
  • X-TREME adhesion primer for a variety of substrates including new and aged EPDM, TPO, and Spray Polyurethane Foam
  • Excellent bleed block resistance to eliminate top coat discoloration over asphalt
  • Which primer is right for me
  • Solid one piece construction
  • Opens plastic containers quickly and easily without damaging the lids
  • Use on virtually any plastic container
  • Recommended for priming over asphalt based surfaces as well as concrete, metal, and aged roof coatings to prevent bleed through to the top coating
  • A penetrating sealer designed to provide a firm surface for application of wall coatings
  • Can be used to install polyester for complete roofing system
  • Which primer is right for me
  • High solid product designed for superior performance in low spots
  • Maintains high elongation even after long term UV-exposure
  • Maximum UV, hail and weathering resistance
  • 15-Year limited manufacturers warranty

COMPLIES WITH:

compliance

astm

crrc
Content

DESCRIPTION. PRODUCT NO. 600-T creates a thick rubber-like shield of protection which is highly resistant to cracking or chipping. This rubberized stucco product also contains bonding agents which give it excellent adhesion and ceramics for insulating properties.

USES. This rubberized stucco product is excellent for use as a complete interior or exterior wall finish, as well as for repairing existing walls. It is paintable, or you may also have it pre-tinted to a color of your choice to eliminate expensive repainting. PRODUCT NO. 600-T can be applied in various types of finishes and is ideal for beautifying virtually any surface, such as existing stucco, masonry, block, brick, metal, plywood, OSB, or wood siding.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules, or peeling paint and all other foreign matter. You can use wire brushing, sanding, or power washing in order to prepare the surface. All cracks, joints, or uneven surfaces should be filled with PRODUCT NO. 501-W-P Patching Compound or PRODUCT NO. 400 Smooth Base Coat can be applied prior to applying PRODUCT NO. 600-T for filling hairline cracks, waterproofing, and providing additional insulation.

APPLICATION. Power mix product to an even mixture, then apply to surface with a stiff brush, roller, trowel, or hopper gun depending on the desired surface. Keep the brush or roller moist for easy application. If you want a thinner texture, then reduce viscosity with PRODUCT NO. 290 Surface Bonder. Apply PRODUCT NO. 600-T at a rate of 5-8 gallons per 100 sq. ft., depending on the desired thickness and finish. This product should not be applied when rain or frost is forecasted within 24 hours. Apply only when the temperature is 55 degrees and rising.

KEEP PRODUCT FROM FREEZING

CLEAN-UP. Clean brushes, tools, and other equipment with soapy water immediately after use.

DESCRIPTION: Single piece extension poles can be used for a variety of painting and cleaning projects. Constructed of strong wood with a metal tip. Threaded tip compatible with threaded paint roller frames, brooms and a variety of other tools.

  • Durable design provides long-lasting performance
  • A do-it-yourself essential offers multiple uses
  • Compatible with many paint rollers, brooms or mops

DESCRIPTION. PRODUCT NO. 297-X X-TREME is a stain resistant, highly adhesive primer for new and existing roofing systems. PRODUCT NO. 297-X X-TREME is a waterproof membrane ideal for areas with low spots that are prone to standing water. PRODUCT NO. 297-X X-TREME should be used as a base coat, not being left exposed to the suns UV rays for extended periods of time.

USES. PRODUCT NO. 297-X X-TREME is to be used as a base coat primer over most substrates including EPDM, TPO, PVC, spray polyurethane foam, Hypalon, asphalt, tar, hot-applied built-up roofing, granulated cap sheet, steel, and aluminum roofing substrates. PRODUCT NO. 297-X X-TREME is not recommended to be used as a fabric saturant when installing fabric overlay systems.

SURFACE PREPARATION. Roof substrates must be clean, dry, free of all debris, and any contaminates which would impede proper adhesion. A pressure wash is recommended, if a pressure washer is not available a cleaning agent should be used in conjunction with hose and broom washing. In addition to pressure washing, a wire brush should be used to remove any surface rust on metal roofing systems. Metal panels where the structural integrity has been compromised should be removed and replaced with like panels. A bleach and water solution (1 part bleach to 2 parts water) should be used to treat any roof areas that have mildew or algae. All roof surfaces should be thoroughly cleaned and allowed to dry completely prior to application of any Tucson Rubberized Coatings restoration products

APPLICATION. Proper protective clothing and PPE should be worn when applying products. It is normal to see a small amount of separation when first opening a pail. If necessary, gently mix the product with a roller frame or paddle mixer, being careful to not introduce air into the product during mixing. Product can be applied by roller (3/8 - 3/4" nap), brush, and spray equipment capable of 2000 - 3000 PSI and 1 - 3 GPM of output. For best results when spraying, an 8-28 - 8-31 reversible spray is recommended. Do not dilute product. Tucson Rubberized Coatings Products should not be applied when freezing temperatures or rain is expected within 24 hours of completed application. During application, roof surface temperatures should be between 40 and 115 degrees Fahrenheit, with no moisture present. PRODUCT NO. 297-X X- TREME must be coated within 24 - 48 hours to avoid premature film degradation.

RECOMMENDED COVERAGE RATES (completed in 1 coats): Product should be applied at a minimum rate of .5 - .75 gallon per 100 square feet of roof surface, per coat. to avoid prolonged cure times, PRODUCT NO. 670 X-TREME should not be applied at a rate greater than 1 gallon per 100 square feet of roof surface per coat. Coverage rates will depend on the porosity of the roofing substrate

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

STORAGE: Product should be stored in a clean and dry area, away from direct sunlight and protected from freezing.

CLEAN-UP. Clean brushes, tools, and other equipment with warm soapy water immediately after use. Dried film may require paint remover.

HANDLING PRECAUTIONS: Product safety information required for safe use is not included. Before handling, read product safety data sheets and container labels for safe use and health hazard information. Safety data sheets are available on the TRC website at: www.rubberized.com.

LIMITED WARRANTY AND DISCLAIMER: To the best of our knowledge, the technical data contained herein is true and accurate at the date of issuance and is subject to change without prior notice. User must contact Tucson Rubberized Coatings to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. Liability, if any, is limited to replacement of product unless installed by an approved contractor in accordance with Tucson Rubberized Coatings warranty procedures and program. For limited manufacturer's warranty and disclaimer information, visit our website at: www.rubberized.com.

DESCRIPTION: Specially designed to open 5 gallon buckets/containers without damaging the lids. The grip of this 5 gallon bucket lid removal tool makes it easy to open the lid without using a screwdriver.

A hole on the end of the handle lets you hang and store this 5 gallon bucket lid opener. Wonderful ergonomic design is comfortable to hold and use over and over. You won’t want to leave this affordable accessory out of your toolbox!

DESCRIPTION: Product No. 295-G STAIN SHIELD is a light gray, highly elastomeric asphalt stain shield and fabric saturant with excellent adhesion to new and existing asphalt roof systems; granulated modified bitumen; SPF (uncoated and acrylic coated); and metal. Product No. 295-G STAIN SHIELD is excellent for liquid applied polyester fabric overlay systems and should be used as a base coat, not being left exposed to the suns UV rays for extended periods of time.

USES: Product No. 295-G STAIN SHIELD is to be used as a base coat primer over asphalt, tar, hot-applied built-up roofing, granulated cap sheet, steel, and aluminum roofing substrates. Product No. 295-G STAIN SHIELD can also be used as a fabric saturant when installing a fabric overlay system.

SURFACE PREPARATION: Roof substrates must be clean, dry, free of all debris, and any contaminates which would impede proper adhesion. A pressure wash is recommended, if a pressure washer is not available a cleaning agent should be used in conjunction with hose and broom washing. In addition to pressure washing, a wire brush should be used to remove any surface rust on metal roofing systems. Metal panels where the structural integrity has been compromised should be removed and replaced with like panels. A bleach and water solution (1 part bleach to 2 parts water) should be used to treat any roof areas that have mildew or algae. All roof surfaces should be thoroughly cleaned and allowed to dry completely prior to application of any Tucson Rubberized Coatings restoration products.

APPLICATION: Proper protective clothing and PPE should be worn when applying products. It is normal to see a small amount of separation when first opening a pail. If necessary, gently mix the product with a roller frame or paddle mixer, being careful to not introduce air into the product during mixing. Product can be applied by roller (3/4 - 1 1/4" nap), brush, and spray equipment capable of 2000 - 3000 PSI and 1 - 3 GPM of output. For best results when spraying, an 8-31 - 8-41 reversible spray is recommended. Do not dilute product. Tucson Rubberized Coatings Products should not be applied when freezing temperatures or rain is expected within 24 hours of completed application. During application, roof surface temperatures should be between 40 and 115 degrees Fahrenheit, with no moisture present.

RECOMMENDED COVERAGE RATES (completed in 2 coats): Product should be applied at a minimum rate of 1 -1.5 gallons per 100 square feet of roof surface, per coat. When used as a fabric saturant, Product No. 295-G STAIN SHIELD should completely saturate the fabric by embedding the fabric between two coats at a minimum of 1 - 1.5 gal per 100 square feet per coat. Coverage rates will depend on the porosity of the roofing substrate.

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

STORAGE: Product should be stored in a clean and dry area, away from direct sunlight and protected from freezing.

CLEAN-UP: Clean brushes, tools, and other equipment with warm soapy water immediately after use. Dried film may require paint remover.

PHYSICAL PROPERTIES: Bleed-Blocking Primer and Fabric Saturant

HANDLING PRECAUTIONS: Product safety information required for safe use is not included. Before handling, read product safety data sheets and container labels for safe use and health hazard information. Safety data sheets are available on the TRC website at: www.rubberized.com.

LIMITED WARRANTY AND DISCLAIMER: To the best of our knowledge, the technical data contained herein is true and accurate at the date of issuance and is subject to change without prior notice. User must contact Tucson Rubberized Coatings to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. Liability, if any, is limited to replacement of product unless installed by an approved contractor in accordance with Tucson Rubberized Coatings warranty procedures and program. For limited manufacturer's warranty and disclaimer information, visit our website at: www.rubberized.com.

DESCRIPTION. PRODUCT NO. 10000 PRO-COAT is an ultra durable 100% acrylic elastomeric roof coating with advanced weathering technology. PRODUCT NO. 10000 PRO-COAT maintains its physical properties even after prolonged exposure to UV light. PRODUCT NO. 10000 PRO-COAT offers excellent flow characteristics, making for a premium application process. Its bright white finish enables it to deflect the sun's heat and harmful UV rays, protecting the roof substrate and lowering energy bills. PRODUCT NO. 10000 PRO-COAT forms a thick, rubber-like shield that expands and contracts greater than 450% to prevent cracking and slow the aging process. PRODUCT NO. 10000 PRO-COAT resists cracking, peeling, and mildew while providing excellent protection against extreme weather. USES. PRODUCT NO. 10000 PRO-COAT can be used over spray polyurethane foam, asphalt, tar, hot-applied built-up roofing, granulated cap sheet, and metal roofing systems. PRODUCT NO. 10000 PROCOAT can be directly applied over most previously coated roof surfaces. PRODUCT NO. 10000 PRO-COAT should not be applied over 100% silicone. When applying over asphalt based substrates, aluminum roof coating, TPO, or EPDM follow surface preparation instructions below. SURFACE PREPARATION. Roof substrates must be clean, dry, free of all debris, and any contaminants which would impede proper adhesion. A pressure wash is recommended, if a pressure washer is not available a cleaning agent should be used in conjunction with hose and broom washing. In addition to pressure washing, a wire brush should be used to remove any surface rust on metal roofing systems. Metal panels where the structural integrity has been compromised should be removed and replaced with like panels. A bleach and water solution (1 part bleach to 2 parts water) should be used to treat any roof areas that have mildew or algae. All roof surfaces should be thoroughly cleaned and allowed to dry completely prior to application of any Tucson Rubberized Coatings products. When applying PRODUCT NO. 10000 PRO-COAT over asphalt based substrates, once coat of PRODUCT NO. 295-G STAIN SHIELD is recommended to avoid bleed-through. Over aluminum roof coating, one coat of PRODUCT NO. 295-G STAIN SHIELD or PRODUCT NO. 297-X X-TREME must be applied prior to the application of PRODUCT NO. 10000 PRO-COAT. All large cracks and seams should be repaired by embedding one layer of polyester fabric between two layers of PRODUCT NO. 502 ACRYLIC MASTIC or PRODUCT NO. 510 ACRYLIC MASTIC prior to application of PRODUCT NO. 10000 PRO-COAT. To achieve proper adhesion over TPO, PVC, or EPDM, one coat of 297-X X-TREME should be applied prior to any Tucson Rubberized Coatings repair or top coat products. APPLICATION. Proper protective clothing and PPE should be worn when applying products. It is normal to see a small amount of separation when first opening a pail. If necessary, gently mix the product with a roller frame or paddle mixer, being careful to not introduce air into the product during mixing. Product can be applied by roller (3/4 - 1 1/4" nap), brush, and spray equipment capable of 2000 - 3000 PSI and 1 - 3 GPM of output. For best results when spraying, an 8-31 - 8-41 reversible spray is recommended. Do not dilute product. Tucson Rubberized Coatings Products should not be applied when freezing temperatures or rain is expected within 24 hours of completed application. During application, roof surface temperatures should be between 40 and 115 degrees Fahrenheit, with no moisture present. Allow 24 to 72 hours depending on weather conditions and applications rate of curing prior to application of second coat. Do not apply unless temperature is 55°F and rising. Do not apply when rain or frost is forecast within 24 hours after application. However, conditions of high humidity will prevent curing in the usual four hours. Avoid heavy foot traffic. DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE. CLEAN-UP. Clean brushes, tools and other equipment with warm soapy water immediately after use. Dried film may require paint remover.
Weight801.25540.225462
Dimensions15 × 15 × 18 cm72 × 4 × 4 cm15 × 15 × 18 cm12 × 12 × 12 cm15 × 15 × 18 cm15 × 15 × 18 cm
Additional information
Weight 80 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

15.7 lbs

Solids by Weight*

79%

Drying Time (50% Relative Humidity & 70°F)

Touch/2-3 hrs

Flammability

None

VOC

< 150 grams/liter

Viscosity

120 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 80 lbs.

Color

White

Size

5 Gallon

Weight 1.25 kg
Dimensions 72 × 4 × 4 cm
Weight 54 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

8.5 lbs

Solids by Weight*

49%

Drying Time (50% Relative Humidity & 70°F)

Touch: 4 hrs, Firm: 12 hrs

Flammability

None

VOC

< 50 g/I

Viscosity

85 – 95 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallon bucket weight approximately 48 lbs.

Color

Off-White

Size

5 Gallon, 1 Gallon

Solids by Volume

49%

Silicone

None

Weight 0.22 kg
Dimensions 12 × 12 × 12 cm
Weight 54 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

8.9 lbs

Solids by Weight*

38%

Drying Time (50% Relative Humidity & 70°F)

Touch/2 hrs – Firm/4 hrs minimum

Flammability

None

Wet Film

None

VOC

< 150 grams/liter

Elongation

>300%

Tensile Strength

450 PSI

Viscosity

115 – 125 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallon bucket weight approximately 50 lbs

Color

Off-White

Size

5 Gallon

Solids by Volume (%)

34%

Silicone (%)

None

Tear Resistance

> 120 lbf/in.

Water Swelling After 7 days

< 15%

Weight 62 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

10.7 lbs

Solids by Weight*

66%

Drying Time (50% Relative Humidity & 70°F)

Touch: 4 hrs, Firm: 12 hrs

Flammability

None

VOC

100 g/l

Elongation

> 450%

Tensile Strength

> 400 PSI

Viscosity

130-140 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5-gallon bucket weight approximately 58 lbs.

Color

Tan, White

Size

5 Gallon