L PRO SOLUTION 9″ PAINT ROLL COVER – 1.25″ NAP

  • 1-1/4″ Nap
  • High Density Polyester Fabric
  • For Extra-Rough Surfaces
  • For All Primers & Flat Paints
LPRO 9in Roll Cover

$4.99

Login / Register for Additional Discounts

  • 1-1/4″ Nap
  • High Density Polyester Fabric
  • For Extra-Rough Surfaces
  • For All Primers & Flat Paints
In Stock. Ready for Delivery.

Description

DESCRIPTION: Professional-grade, 9″ roller cover with high density polyester fabric for all Primers and Flat paints.

Additional information

Weight 0.15 kg
Dimensions 12 × 12 × 12 cm

Quick Comparison

SettingsL PRO SOLUTION 9" PAINT ROLL COVER - 1.25" NAP removePRODUCT NO. 7000 ULTIMATE ACRYLIC TOPCOAT removeEssential RV Coating Bundle removeSelf-adhesive Granulated Cap Sheet Membrane TRC 950-C removePRODUCT: 700 ULTIMATE RV ROOF COATING remove5 GALLON BUCKET LID OPENER remove
ImageLPRO 9in Roll CoverTucson Rubberized Coating product 7000image 6483441950c whiteUltimate RV roof coating product no 70005gal bucket opener
SKURC9-1.257000W5700W1LOR5
Rating
Price$4.99

Login / Register for Additional Discounts

From $106.00

Login / Register for Additional Discounts

$75.00

Login / Register for Additional Discounts

From $140.00

Login / Register for Additional Discounts

$25.00

Login / Register for Additional Discounts

$2.99

Login / Register for Additional Discounts

Stock
Availability
Add to cart

Add to cart

Buying Options

Add to cart

Buying Options

Add to cart

Add to cart

Description
  • 1-1/4" Nap
  • High Density Polyester Fabric
  • For Extra-Rough Surfaces
  • For All Primers & Flat Paints
  • Maximum adhesion, strength, & elasticity to resist cracking & peeling
  • Maximum bleed block technology w/ no yellowing or staining over all tested substrates
  • Maximum coating properties to ensure the highest grade of protection from extreme weather conditions
  • 12-Year limited manufacturers warranty

COMPLIES WITH:

compliance

crrc

TRC 950-C are self-adhesive cap sheet membranes composed of SBS modified bitumen with a composite reinforcement. The surface is protected by granules, while the underface is covered with a split-back silicone release film.
  • Manufactured to adhere to common RV roofs including EPDM and TPO when used with 297-X primer
  • Ultra white that remains whiter than any coating in its class
  • Maximum adhesion, strength, and elasticity to resist cracking and peeling
  • Maximum bleed block technology with no yellowing or staining over all tested substrates
  • 5-Year limited manufacturers warranty
  • Solid one piece construction
  • Opens plastic containers quickly and easily without damaging the lids
  • Use on virtually any plastic container
Content

DESCRIPTION: Professional-grade, 9" roller cover with high density polyester fabric for all Primers and Flat paints.

DESCRIPTION. Perma-Coat Roof Coating is an ultra-white 100% acrylic elastomeric roof coating. This premium grade coating is designed for maximum protection against sun and weather. Its bright finish enables it to reject the sun’s heat and harmful UV rays. This product forms a thick, rubber-like shield that expands and contracts over 400% to prevent roof damage. It resists cracking, peeling, and mildew while offering unbeatable weatherproof protection and excellent resistance to lifting under ponding water conditions.

USES. Perma-Coat Roof Coating can be used over mineral surface roofing, aged aluminum, tar, asphalt, or hot-applied built-up roofing after application of PRODUCT NO. 210 emulsion. All large cracks and seams should be reinforced with woven polyester fabric embedded into PRODUCT NO. 210. (on EPDM roofs, embed membrane over any large crack or seams into PRODUCT NO. 7000). This product can be directly applied over most previously white-coated sound roof surfaces. This product is highly recommended for EPDM roofs or areas subject to unusually severe moisture conditions such as valleys, around roof drains, low spots or in any area where water is expected to be trapped on a roof.

SURFACE PREPARATION. Before applying acrylic coatings, all surfaces must be dry and free of dust, oil, loose granules, gravel or peeling paint and all other foreign matter. Rusty metal must be cleaned with a wire brush and primed with PRODUCT NO. 101 Asphalt primer prior to application of PRODUCT NO. 210 emulsion and PRODUCT NO. 7000 Perma-Coat Roof Coating. Polyurethane Foam Roofs: Prime surface with PRODUCT NO. 295 Surface conditioner prior to application of PRODUCT NO. 7000. Pressure washing surfaces is recommended for best results. Surfaces with any mildew growth or stains should be cleaned with a bleach solution (2 parts water to one part bleach) prior to applying acrylic coatings. Be sure that all surfaces are thoroughly rinsed and dry prior to coating application.

APPLICATION. Material should be stirred in the container and applied by a soft bristle brush or broom, a long nap roller or suitable spray equipment (minimum working pressure of 3000 PSI for airless sprayer). Coverage rates will vary depending on porosity of surface as well as roof pitch. Recommended application is two coats applied at right angles to previous coat by brush, roller or spray for maximum reflectivity, durability and life cycles. First coat must dry before second coat is applied. During application, keep tools clean and free from coating build up by rinsing frequently with water. Adequate protection for most surfaces is obtained by the use of two gallons of Perma-Coat Roof Coating per 100 sq. ft. applied in two coats.

Allow 24 to 72 hours depending on weather conditions and applications rate of curing prior to application of second coat. Do not apply unless temperature is 55°F and rising. Do not apply when rain or frost is forecast within 24 hours after application. However, conditions of high humidity will prevent curing in the usual four hours. Avoid heavy foot traffic.

KEEP PRODUCT FROM FREEZING.

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

CLEAN-UP. Clean brushes, tools and other equipment with soapy water immediately after using acrylic coatings. Dried film may require paint remover.

PRODUCT: 700 ULTIMATE RV ROOF COATING

  • Manufactured to adhere to common RV roofs including EPDM and TPO when used with 297-X primer
  • Ultra white that remains whiter than any coating in its class
  • Maximum adhesion, strength, and elasticity to resist cracking and peeling
  • Maximum bleed block technology with no yellowing or staining over all tested substrates
  • 5-Year limited manufacturers warranty

PRODUCT NO 297-X ULTIMATE ADHESION ACRYLIC PRIMER

  • Creates a waterproofing membrane for areas with frequent standing water
  • X-TREME adhesion primer for a variety of substrates including new and aged EPDM, TPO, and Spray Polyurethane Foam
  • Excellent bleed block resistance to eliminate top coat discoloration over asphalt
  • Which primer is right for me

TIETEX POLYESTER ROOFING MEMBRANE – REINFORCEMENT ROOFING FABRIC

  • 6″ x 324′
  • Tietex polyester fabric is a stitch-bonded, high-performance fabric
  • Used in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic
  • The polyester fabric is white with lay lines for one and two-ply roof systems

PREMIER 4″ FLAT SASH PAINT BRUSH

  • Polyester bristles provide superior control
  • Durable and easy to clean
  • Can be used with interior or exterior paints

DESCRIPTION. Ultimate RV Roof Coating from Tucson Rubberized Coatings is an ultra-white 100% acrylic elastomeric roof coating. This premium grade coating is designed for maximum protection against sun and weather. Its bright finish enables it to reject the sun’s heat and harmful UV rays. This product forms a thick, rubber-like shield that expands and contracts over 400% to prevent roof damage. It resists cracking, peeling, and mildew while offering unbeatable weatherproof protection and excellent resistance to lifting under ponding water conditions.

USES. Ultimate RV Roof Coating can be used over mineral surface roofing, aged aluminum, tar, asphalt, or hot-applied built-up roofing after application of PRODUCT NO. 210 emulsion. All large cracks and seams should be reinforced with woven polyester fabric embedded into PRODUCT NO. 210. (on EPDM or TPO roofs, embed membrane over any large crack or seams into PRODUCT NO. 700). This product can be directly applied over most previously white-coated sound roof surfaces. PRODUCT NO. 700 is highly recommended for EPDM or TPO roofs or areas subject to unusually severe moisture conditions such as valleys, around roof drains, low spots or in any area where water is expected to be trapped on a roof.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules, gravel or peeling paint and all other foreign matter. Rusty metal must be cleaned with a wire brush and primed with PRODUCT NO. 101 Asphalt primer prior to application of PRODUCT NO. 210 emulsion and PRODUCT NO. 700 Ultimate RV Roof Coating. Polyurethane Foam Roofs: Must be dry and clean of debris before application. Pressure washing surfaces is recommended in order to ensure the best results. Surfaces with any mildew growth or stains should be cleaned with a bleach solution (2 parts water to one part bleach) prior to applying this product. Be certain all surfaces are thoroughly rinsed and dry prior to coating application.

APPLICATION: Material should be stirred in the container and applied by a soft bristle brush or broom, a long nap roller or suitable spray equipment (minimum working pressure of 3000 PSI for airless sprayer). Coverage rates will vary depending on porosity of surface as well as roof pitch. Recommended application is two coats applied at right angles to previous coat by brush, roller or spray for maximum reflectivity, durability and life cycles. First coat must dry before second coat is applied.

During application, keep tools clean and free from coating build up by rinsing frequently with water. Adequate protection for most surfaces is obtained by the use of two gallons of Ultimate Ultimate RV Roof Coating per 100 sq. ft. applied in two coats. Allow 24 to 72 hours depending on weather conditions and applications rate of curing prior to application of second coat. Do not apply unless temperature is 55°F and rising. Do not apply when rain or frost is forecast within 24 hours after application. Conditions of high humidity will prevent curing in the usual four hours. Avoid heavy foot traffic.

KEEP PRODUCT FROM FREEZING.

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

CLEAN-UP. Clean brushes, tools and other equipment with soapy water immediately after use. However, dried film may require paint remover.

DESCRIPTION: Specially designed to open 5 gallon buckets/containers without damaging the lids. The grip of this 5 gallon bucket lid removal tool makes it easy to open the lid without using a screwdriver.

A hole on the end of the handle lets you hang and store this 5 gallon bucket lid opener. Wonderful ergonomic design is comfortable to hold and use over and over. You won’t want to leave this affordable accessory out of your toolbox!

Weight0.156275110130.22
Dimensions12 × 12 × 12 cm15 × 15 × 18 cm15 × 15 × 18 cm60 × 14 × 14 cm10 × 10 × 10 cm12 × 12 × 12 cm
Additional information
Weight 0.15 kg
Dimensions 12 × 12 × 12 cm
Weight 62 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

11.4 lbs

Solids by Weight*

71%

Drying Time (50% Relative Humidity & 70°F)

Touch/2.5 hrs – Firm/5 hrs minimum

Flammability

None

Wet Film

None

VOC

< 150 grams/liter

Elongation

>400%

Tensile Strength

400 PSI

Viscosity

120 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 62 lbs

Color

Tan, White

Size

5 Gallon

Weight 75 kg
Dimensions 15 × 15 × 18 cm
Weight 110 kg
Dimensions 60 × 14 × 14 cm
Thickness

141 mil (3.6 mm)

Dimensions

39 in × 33 ft (1 m × 10 m)

Gross/Net Coverage

107 sq ft (10 sq m)
99 sq ft (9.2 sq m)

Roll weight

86 lb (39 kg)

Surface

Granuled

Underface

Self-adhesive, covered with a split-back silicone release film

Ul 790*

TRC 950-C

Color

Tan, White

Weight 13 kg
Dimensions 10 × 10 × 10 cm
Weight per Gallon

11.4 lbs

Solids by Weight*

71%

Drying Time (50% Relative Humidity & 70°F)

Touch/2.5 hrs – Firm/5 hrs minimum

Flammability

None

Wet Film

None

VOC

< 150 grams/liter

Elongation

>400%

Tensile Strength

400 PSI

Viscosity

120 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
1 gallon 12 lbs

Color

Tan, White

Size

1 Gallon

Weight 0.22 kg
Dimensions 12 × 12 × 12 cm