5 GALLON BUCKET LID OPENER

  • Solid one piece construction
  • Opens plastic containers quickly and easily without damaging the lids
  • Use on virtually any plastic container
5gal bucket opener

$2.99

Login / Register for Additional Discounts

  • Solid one piece construction
  • Opens plastic containers quickly and easily without damaging the lids
  • Use on virtually any plastic container
In Stock. Ready for Delivery.

Description

DESCRIPTION: Specially designed to open 5 gallon buckets/containers without damaging the lids. The grip of this 5 gallon bucket lid removal tool makes it easy to open the lid without using a screwdriver.

A hole on the end of the handle lets you hang and store this 5 gallon bucket lid opener. Wonderful ergonomic design is comfortable to hold and use over and over. You won’t want to leave this affordable accessory out of your toolbox!

Additional information

Weight 0.22 kg
Dimensions 12 × 12 × 12 cm

Quick Comparison

Settings5 GALLON BUCKET LID OPENER removePRODUCT NO. 285 WATER SEALER & REPELLENT removeTIETEX POLYESTER ROOFING MEMBRANE - REINFORCEMENT ROOFING FABRIC removePRODUCT: 700 ULTIMATE RV ROOF COATING removePRODUCT NO 297-X ULTIMATE ADHESION ACRYLIC PRIMER removeSelf-Adhesive Base Ply Membrane TRC 950-B remove
Image5gal bucket openerSilane/siloxane water repellent product-285TietexaUltimate RV roof coating product no 7000product 297950b product
SKULOR5285C5324W4700W1297-x
Rating
Price$2.99

Login / Register for Additional Discounts

$80.87

Login / Register for Additional Discounts

From $26.50

Login / Register for Additional Discounts

$25.00

Login / Register for Additional Discounts

From $25.00

Login / Register for Additional Discounts

$140.00

Login / Register for Additional Discounts

Stock
Availability
Add to cart

Add to cart

Add to cart

Buying Options

Add to cart

Buying Options

Add to cart

Description
  • Solid one piece construction
  • Opens plastic containers quickly and easily without damaging the lids
  • Use on virtually any plastic container
  • Water-based silane/siloxane water repellent
  • Can be used in lightweight concrete and mortar joints
  • Does not alter the appearance of surfaces
  • Designed to seal porous surfaces; Brick, Block, Adobe
  • 4" x 324'
  • 6" x 324'
  • 12" x 324'
  • 20" x 324'
  • 40" x 324'
  • Tietex polyester fabric is a stitch-bonded, high-performance fabric
  • Used in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic
  • The polyester fabric is white with lay lines for one and two-ply roof systems
  • Manufactured to adhere to common RV roofs including EPDM and TPO when used with 297-X primer
  • Ultra white that remains whiter than any coating in its class
  • Maximum adhesion, strength, and elasticity to resist cracking and peeling
  • Maximum bleed block technology with no yellowing or staining over all tested substrates
  • 5-Year limited manufacturers warranty
  • Creates a waterproofing membrane for areas with frequent standing water
  • X-TREME adhesion primer for a variety of substrates including new and aged EPDM, TPO, and Spray Polyurethane Foam
  • Excellent bleed block resistance to eliminate top coat discoloration over asphalt
  • Which primer is right for me
TRC 950-B is a self-adhesive base ply membrane composed of SBS modified bitumen. The surface is a UV-resistant tri-laminated woven polyethylene, while the self-adhesive underface is covered with a split-back silicone release film.
Content

DESCRIPTION: Specially designed to open 5 gallon buckets/containers without damaging the lids. The grip of this 5 gallon bucket lid removal tool makes it easy to open the lid without using a screwdriver.

A hole on the end of the handle lets you hang and store this 5 gallon bucket lid opener. Wonderful ergonomic design is comfortable to hold and use over and over. You won’t want to leave this affordable accessory out of your toolbox!

DESCRIPTION. PRODUCT NO. 285 can seal porous surfaces such as brick, block, adobe or concrete, and pavers.

USES. PRODUCT NO. 285 is excellent for use as a protective sealer against water on nearly any surface. Surfaces this product can be used to protect against water include brick, block, adobe or concrete, pavers and wood decks.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules or peeling paint, as well as all other foreign matter. Use wire brushing, sanding or power washing to prepare surfaces.

APPLICATION. Power mix the water sealer and repellent to an even mixture. Apply to surface with a stiff brush, roller or airless sprayer to desired surface. Also, keep the brush or roller moist for easy application. Do not apply product when rain or frost is forecast within 24 hours. Apply only when the temperature is 50 degrees and rising.

KEEP PRODUCT FROM FREEZING

CLEAN-UP. Use soap and water to clean all equipment immediately after use. If you have dried film, then you may need to use paint remover.

SIZE. 4" x 324'

DESCRIPTION. Tietex polyester roofing membrane is a reinforcement roofing fabric that is white with lay lines for one and two-ply roof systems. It offers an unusual combination of high-strength properties, and it also delivers good elongation for excellent thermal stress force accommodations.

USES. Tietex polyester fabric is a stitch-bonded, high-performance fabric for use in applied built-up roofing and roof maintenance systems using either water-based asphalt, acrylic emulsions, or solvent type coatings or mastic.

Made in the USA. If you would like to learn more about this exceptional roofing product, then get in touch with Tucson Rubberized Coatings today. We will be glad to answer your questions. If you need help finding the right coating product, then our team can help!

DESCRIPTION. Ultimate RV Roof Coating from Tucson Rubberized Coatings is an ultra-white 100% acrylic elastomeric roof coating. This premium grade coating is designed for maximum protection against sun and weather. Its bright finish enables it to reject the sun’s heat and harmful UV rays. This product forms a thick, rubber-like shield that expands and contracts over 400% to prevent roof damage. It resists cracking, peeling, and mildew while offering unbeatable weatherproof protection and excellent resistance to lifting under ponding water conditions.

USES. Ultimate RV Roof Coating can be used over mineral surface roofing, aged aluminum, tar, asphalt, or hot-applied built-up roofing after application of PRODUCT NO. 210 emulsion. All large cracks and seams should be reinforced with woven polyester fabric embedded into PRODUCT NO. 210. (on EPDM or TPO roofs, embed membrane over any large crack or seams into PRODUCT NO. 700). This product can be directly applied over most previously white-coated sound roof surfaces. PRODUCT NO. 700 is highly recommended for EPDM or TPO roofs or areas subject to unusually severe moisture conditions such as valleys, around roof drains, low spots or in any area where water is expected to be trapped on a roof.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules, gravel or peeling paint and all other foreign matter. Rusty metal must be cleaned with a wire brush and primed with PRODUCT NO. 101 Asphalt primer prior to application of PRODUCT NO. 210 emulsion and PRODUCT NO. 700 Ultimate RV Roof Coating. Polyurethane Foam Roofs: Must be dry and clean of debris before application. Pressure washing surfaces is recommended in order to ensure the best results. Surfaces with any mildew growth or stains should be cleaned with a bleach solution (2 parts water to one part bleach) prior to applying this product. Be certain all surfaces are thoroughly rinsed and dry prior to coating application.

APPLICATION: Material should be stirred in the container and applied by a soft bristle brush or broom, a long nap roller or suitable spray equipment (minimum working pressure of 3000 PSI for airless sprayer). Coverage rates will vary depending on porosity of surface as well as roof pitch. Recommended application is two coats applied at right angles to previous coat by brush, roller or spray for maximum reflectivity, durability and life cycles. First coat must dry before second coat is applied.

During application, keep tools clean and free from coating build up by rinsing frequently with water. Adequate protection for most surfaces is obtained by the use of two gallons of Ultimate Ultimate RV Roof Coating per 100 sq. ft. applied in two coats. Allow 24 to 72 hours depending on weather conditions and applications rate of curing prior to application of second coat. Do not apply unless temperature is 55°F and rising. Do not apply when rain or frost is forecast within 24 hours after application. Conditions of high humidity will prevent curing in the usual four hours. Avoid heavy foot traffic.

KEEP PRODUCT FROM FREEZING.

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

CLEAN-UP. Clean brushes, tools and other equipment with soapy water immediately after use. However, dried film may require paint remover.

DESCRIPTION. PRODUCT NO. 297-X X-TREME is a stain resistant, highly adhesive primer for new and existing roofing systems. PRODUCT NO. 297-X X-TREME is a waterproof membrane ideal for areas with low spots that are prone to standing water. PRODUCT NO. 297-X X-TREME should be used as a base coat, not being left exposed to the suns UV rays for extended periods of time.

USES. PRODUCT NO. 297-X X-TREME is to be used as a base coat primer over most substrates including EPDM, TPO, PVC, spray polyurethane foam, Hypalon, asphalt, tar, hot-applied built-up roofing, granulated cap sheet, steel, and aluminum roofing substrates. PRODUCT NO. 297-X X-TREME is not recommended to be used as a fabric saturant when installing fabric overlay systems.

SURFACE PREPARATION. Roof substrates must be clean, dry, free of all debris, and any contaminates which would impede proper adhesion. A pressure wash is recommended, if a pressure washer is not available a cleaning agent should be used in conjunction with hose and broom washing. In addition to pressure washing, a wire brush should be used to remove any surface rust on metal roofing systems. Metal panels where the structural integrity has been compromised should be removed and replaced with like panels. A bleach and water solution (1 part bleach to 2 parts water) should be used to treat any roof areas that have mildew or algae. All roof surfaces should be thoroughly cleaned and allowed to dry completely prior to application of any Tucson Rubberized Coatings restoration products

APPLICATION. Proper protective clothing and PPE should be worn when applying products. It is normal to see a small amount of separation when first opening a pail. If necessary, gently mix the product with a roller frame or paddle mixer, being careful to not introduce air into the product during mixing. Product can be applied by roller (3/8 - 3/4" nap), brush, and spray equipment capable of 2000 - 3000 PSI and 1 - 3 GPM of output. For best results when spraying, an 8-28 - 8-31 reversible spray is recommended. Do not dilute product. Tucson Rubberized Coatings Products should not be applied when freezing temperatures or rain is expected within 24 hours of completed application. During application, roof surface temperatures should be between 40 and 115 degrees Fahrenheit, with no moisture present. PRODUCT NO. 297-X X- TREME must be coated within 24 - 48 hours to avoid premature film degradation.

RECOMMENDED COVERAGE RATES (completed in 1 coats): Product should be applied at a minimum rate of .5 - .75 gallon per 100 square feet of roof surface, per coat. to avoid prolonged cure times, PRODUCT NO. 670 X-TREME should not be applied at a rate greater than 1 gallon per 100 square feet of roof surface per coat. Coverage rates will depend on the porosity of the roofing substrate

DO NOT APPLY TO ANY SURFACES THAT CONTAIN SILICONE.

STORAGE: Product should be stored in a clean and dry area, away from direct sunlight and protected from freezing.

CLEAN-UP. Clean brushes, tools, and other equipment with warm soapy water immediately after use. Dried film may require paint remover.

HANDLING PRECAUTIONS: Product safety information required for safe use is not included. Before handling, read product safety data sheets and container labels for safe use and health hazard information. Safety data sheets are available on the TRC website at: www.rubberized.com.

LIMITED WARRANTY AND DISCLAIMER: To the best of our knowledge, the technical data contained herein is true and accurate at the date of issuance and is subject to change without prior notice. User must contact Tucson Rubberized Coatings to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. Liability, if any, is limited to replacement of product unless installed by an approved contractor in accordance with Tucson Rubberized Coatings warranty procedures and program. For limited manufacturer's warranty and disclaimer information, visit our website at: www.rubberized.com.

Weight0.22442.2135460
Dimensions12 × 12 × 12 cm15 × 15 × 18 cm15 × 15 × 18 cm10 × 10 × 10 cm15 × 15 × 18 cm60 × 14 × 14 cm
Additional information
Weight 0.22 kg
Dimensions 12 × 12 × 12 cm
Weight 44 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

8.0 lbs

Drying Time (50% Relative Humidity & 70°F)

Touch/2-3 hrs

Flammability

None

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallons 44 lbs.

Color

Clear

Size

5 Gallon

Weight 2.2 kg
Dimensions 15 × 15 × 18 cm
Color

White

Size

4" x 324', 6" x 324', 12" x 324', 20" x 324', 40" x 324'

Weight 13 kg
Dimensions 10 × 10 × 10 cm
Weight per Gallon

11.4 lbs

Solids by Weight*

71%

Drying Time (50% Relative Humidity & 70°F)

Touch/2.5 hrs – Firm/5 hrs minimum

Flammability

None

Wet Film

None

VOC

< 150 grams/liter

Elongation

>400%

Tensile Strength

400 PSI

Viscosity

120 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
1 gallon 12 lbs

Color

Tan, White

Size

1 Gallon

Weight 54 kg
Dimensions 15 × 15 × 18 cm
Weight per Gallon

8.5 lbs

Solids by Weight*

49%

Drying Time (50% Relative Humidity & 70°F)

Touch: 4 hrs, Firm: 12 hrs

Flammability

None

VOC

< 50 g/I

Viscosity

85 – 95 KU

*NOTE:

Percentages stated are + or – 5%

Approx. Shipping Weights:

(All approximate weights include container)
5 gallon bucket weight approximately 48 lbs.

Color

Off-White

Size

5 Gallon, 1 Gallon

Solids by Volume

49%

Silicone

None

Weight 60 kg
Dimensions 60 × 14 × 14 cm
Thickness

40 mil (1.0 mm)

Dimensions

39 in × 65 ft (1 m × 20 m)

Gross/Net Coverage

213 sq ft (20 sq m) / 194 sq ft (18 sq m)

Roll Weight

40 lb (20 kg)

Surface

Tri-laminated Woven polyethylene

Underface

Self-adhesive, covered with a split-back silicone release film