Patching Compound and Puddle Filler

Product No. 501-W White Patching Compound


Product No. 501-W
is a premium quality elastomeric patching compound which combines acrylic polymers with a high solid content. Can be used as a patching compound for filling voids and for filling gaps in parapet walls, sealing around penetrations or for sealing drains or scuppers. It is THE repair product for URETHANE FOAM ROOFS.

$21.99/ 1 Gal.

$63.99/ 3.5 Gal.

$94.99/ 5 Gal.

Product 501 Specification Sheet

Description: Product 501-W White patching compound is a premium quality elastomeric patching compound designed for use in the construction of professional roof flashings. This material is a blend of Acrylic polymers with a high solid content.

Uses: Product 501-W White patching compound can be used as a patching compound or flashing cement for filling voids, gaps in parapet walls. Also used to seal around penetrations, drains, or scuppers. This is the ideal patching compound for polyurethane foam roofs.

Surface Preparation: All surfaces to receive white patching compound must be scrubbed clean and free from oil, grease, rust, scale, loose paint and dirt.

Application: This material is applied with a stiff brush. Apply in a thickness of 1/16″ to 1/8″ and embed polyester membrane for reinforcement. Apply liberally in joint areas, seams or cracks. Work material to be a feather edge to allow for surface drainage.

Clean-Up: All equipment and tools should be cleaned with warm water and soap if necessary immediately after use.

Physical Properties: Solids Content: 80% by Wt. Weight per Gallon: 13lbs. Dry Time: Touch Dry: 6 hours at 70° F and 50% Relative Humidity. VOC <150 g/liter

Shipping Weight: 5 Gallon Pail: 67 lbs./each; 1 Gallon Can 13lbs

Download PDF

pdf

Product No. 501-W-P White Patching Compound with Polyester

Product No. 501-W-P is the same as above with chopped polyester fibers added for strength.

$21.99/ 1 Gal.

$94.99/ 5 Gal.

Product No. 550 Puddle Filler

Product No. 550 is a premium quality fiberglass reinforced thick puddle and void filler compound designed for use in filling areas that tend to collect water, also known as ponding. Light Tan color.

$59.99/ 5 Gal.

Product 550 Specification Sheet

Description: Product 550 Puddle Filler is a premium quality elastomeric patching compound designed for use in the construction of professional roof flashings. This material is a blend of Acrylic polymers with a high solid content.

Uses: Product 550 Puddle Filler can be used as a patching compound or flashing cement for filling voids, gaps in parapet walls. Also used to seal around penetrations, drains, or scuppers.

Surface Preparation: All surfaces to receive white patching compound must be scrubbed clean and free from oil, grease, rust, scale, loose paint and dirt.

Application: This material is applied with a trowel. Apply in a thickness of 1/8″ to 1/4″ and embed polyester membrane for reinforcement. Apply liberally in joint areas, seams or cracks. Work material to be a feather edge to allow for surface drainage.

Clean-Up: All equipment and tools should be cleaned with warm water and soap if necessary immediately after use.

Physical Properties: Solids Content: 80% by Wt. Weight per Gallon: 13lbs. Dry Time: Touch Dry: 6 hours at 70° F and 50% Relative Humidity. VOC <150 g/liter

Shipping Weight: 5 Gallon Pail: 67 lbs./each; 1 Gallon Can 13lbs

Download PDF

pdf