Tucson Application for Stucco and Wall Coatings

  1. Wash surface and remove any loose material or peeling paint.
  2. Apply Self Adhesive Fiberglass membrane over all large cracks, joints and seams.
  3. Waterproof any porous or untreated surface with Product No. 210 Elastomeric Emulsion. Apply the product with a roller, brush or suitable commercial spray equipment.
  4. Fill any large cracks or voids with Product No. 501 – Elasto White Patching Compound. Apply the product by brush or trowel.
  5. Apply two coats of Rubberized Stucco or Wall Coating. Apply the stucco product with a roller, brush, trowel or hopper gun depending upon the finished texture you desire. Apply the wall coating product by roller, brush or suitable commercial spray equipment.