|
Description: Product 501-W White patching compound is a premium quality elastomeric patching compound designed for use in the construction of professional roof flashings. This material is a blend of Acrylic polymers with a high solid content. Uses: Product 501-W White patching compound can be used as a patching compound or flashing cement for filling voids, gaps in parapet walls. Also used to seal around penetrations, drains, or scuppers. This is the ideal patching compound for polyurethane foam roofs. Surface Preparation: All surfaces to receive white patching compound must be scrubbed clean and free from oil, grease, rust, scale, loose paint and dirt. Application: This material is applied with a stiff brush. Apply in a thickness of 1/16" to 1/8" and embed polyester membrane for reinforcement. Apply liberally in joint areas, seams or cracks. Work material to be a feather edge to allow for surface drainage. Clean-Up: All equipment and tools should be cleaned with warm water and soap if necessary immediately after use. Physical Properties: Solids Content: 80% by Wt. Weight per Gallon: 13lbs. Dry Time: Touch Dry: 6 hours at 70° F and 50% Relative Humidity. VOC <150 g/liter Shipping Weight: 5 Gallon Pail: 67 lbs./each; 1 Gallon Can 13lbs
Roofing
Products | Stucco & Wall Coatings | Complete
Roofing Systems E-mail: info@rubberized.com Copyright © 2010 - Tucson Rubberized Coatings |
