|
Surface Conditioner & Primer Uses: Product No. 295 is a penetrating sealer designed to provide a firm surface prior to application of latex roof or wall coatings. Product # 295 is specially recommended for priming over surfaces coated with low cohesion factor products such as Aluminum roof coatings, exposed Polyurethane foam roofs or any badly oxidized areas of roof or exterior walls. Surface Preparation: Repair all cracks and structural defects which allow the entrance of moisture or promote moisture damage. Surface must be clean, dry, and free from dirt, mildew, oil, grease, flaking, peeling and scaling. Efflorescence should be removed by scrapping or pressure washing. Scrubbing the surface with T.S.P. and completely rinsing off with water is highly recommended. Application: Stir thoroughly and apply uniformly by roller, brush or airless spray at a rate of one gallon per 150 to 200 square feet. Do no apply this product if rain or frost is forecasted in 24 hours. Drying Time: dry in 2 to 12 hours depending on temperature and r/h.
Roofing
Products | Stucco & Wall Coatings | Complete
Roofing Systems E-mail: info@rubberized.com Copyright © 2004 - Tucson Rubberized Coatings |
